SAFETY GUIDELINES
This manual contains information that is important for you to know and understand. This infor- mation relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the following symbols. Please read the manual and pay attention to these sections.
URGENT SAFETY INFORMATION - A HAZARD THAT WILL CAUSE SERIOUS INJURY OR LOSS OF LIFE.
Information for preventing damage to equipment.
IMPORTANT SAFETY INFORMATION - A HAZARD THAT MIGHT CAUSE SERIOUS INJURY OR LOSS OF LIFE.
NOTE Information that you should pay special attention to.
HAZARDS CAN OCCUR IF EQUIPMENT IS NOT USED PROPERLY.
PLEASE READ THE FOLLOWING CHART.
WHAT TO |
|
LOOK FOR WHAT COULD HAPPEN | HOW TO PREVENT IT |
Hot Parts | The metal compressor components, such as |
| manifold , tubes, etc. become hot when the air |
| compressor is running. If you touch them, you |
| may be seriously burned. |
Avoid contact with metal components of the compressor during or immediately after operation. Reaching under or removing portions of the plastic enclosures such as the console cover exposes hot surfaces. Allow compressor to cool prior to servicing.
Flammable Vapors
It is normal for the motor and pressure switch to spark when compressor starts or stops. A spark can ignite vapors from gasoline or solvents, causing a fire or explosion.
If spraying a flammable material, provide ample ventilation. Never spray in a closed area. There must be a flow of fresh air at all times.
Always operate the air compressor in
Air Tank | Modifications to air compressor components in an |
| attempt to reach higher air pressure can cause the |
| air tank to rupture or explode. |
| Incompatibility between tank and compressor will |
| cause the tank to rupture. |
| Modifications to the air tank will cause it to weaken. |
Do not adjust, remove or tamper with the safety valve or pressure switch. If safety valve or pressure switch replacement is necessary, a part with the same ratings must be used.
Never replace the air tank with a different model or a larger tank. Return to Sears Service Center if replacement is required.
Never drill into, weld or in any way modify the air tank. The tank may rupture or explode. If leaks develop due to corrosion or tank is damaged, return to Sears Service Center for replacement.
3