Electrolux ESL 66010 user manual Cancelling the delay start, End of the washing programme

Page 26

26electrolux daily use

Cancel a washing programme in progress

Simultaneously press and hold the two programme buttons positioned

over the word Cancel , until all the programme button lights illuminate. The washing programme has been cancelled.

If a new washing programme is to be selected, check that there is detergent in the detergent dispenser.

Open the dishwasher door.

The indicator light of the programme just ended will remain on.

1.Switch off the dishwasher by pressing the On/Off button.

2.Leave the dishwasher door ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.

Cancelling the delay start

To cancel a delay start in progress you have to reset the dishwasher.

Simultaneously press and hold the two programme buttons positioned over the word Cancel , until all the programme button lights will illuminate.

Cancelling a delay start involves also the cancelling of the washing programme set. In this case you have to set the washing programme again.

End of the washing programme

The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme.

When the washing programme has ended, the optical signal on the floor beneath the dishwasher’s door will turn off.

Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

Image 26
Contents Dishwasher ESL We were thinking of you Welcome to the world of Electrolux Contents Correct use Safety informationGeneral safety Child safety InstallationProduct description Control panel Indicator lights Salt Rinse aid Multi-tab functionSetting mode Factory setting Audible signalsSetting of the water softener End of programme Set the water softener First useIf you want to use combi detergent Clarke Mmol/lExamples Setting manuallySetting electronically First time Filling with dishwasher saltTo fill Filling with rinse aid Only use branded rinse aid for dishwashersDaily use Loading cutlery and dishesDaily use Lower basket Cutlery basket HandleUpper basket Adjusting the height of the upper basket Maximum height of the dishes in the lower basketDetergent tablets Use of detergentFill with detergent Activation/deactivation of the Multi- tab function Activation/deactivation of the rinse aid dispenser Interrupt a washing programme in progress Unloading the dishwasher Cancelling the delay startEnd of the washing programme Degree Washing programmesProgramme Programme descriptionCare and cleaning Cleaning the filtersFrost precautions External cleaningInternal cleaning Moving the machinePossible cause and solution Something not workingMalfunction Dishes are not clean Dishes are wet and dull Wash results are not satisfactoryTechnical data KWh Consumption values ProgrammeMinutes LitresHints for test institutes Levelling InstallationFixing to the adjacent units Water supply connections Water inlet hose with safety valve Water outlet hose connection Plastic membrane a must beElectrical connection Old appliance Environment concernsPackaging material Service and Spare Parts Guarantee/Customer ServiceStandard guarantee conditions 0870 5 929European guarantee Customer CareAlbania Electrolux Electrolux Page 117989 83/0-00-21022007