Electrolux ESL 66010 user manual Something not working, Possible cause and solution

Page 30

30 electrolux something not working

Something not working

The dishwasher will not start or stops during operation.

Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer.

Open the door and carry out the following suggested corrective actions.

 

Fault code and malfunction

Possible cause and solution

● continuous flashing of the light of the

● The water tap is blocked or furred with

 

running programme,

 

limescale.

● point-shaped optical signal is flashing,

Clean the water tap.

●

appears in the digital display,

 

● The water tap is turned off.

 

Turn the water tap on.

 

 

 

●intermittent audible signal,

 

 

● The filter (where present) in the threaded

The dishwasher does not fill with water

hose fitting at the water inlet valve is

 

 

blocked.

 

 

Clean the filter in the threaded hose.

 

 

● The water inlet hose has not been

 

 

correctly laid or it is bent or squashed.

 

 

Check the water drain hose connection.

● continuous flashing of the light of the

● The sink spigot is blocked.

 

running programme,

Clean out the sink spigot.

● point-shaped optical signal is flashing,

● The water drain hose has not been

●

appears in the digital display,

correctly laid or it is bent or squashed.

Check the water drain hose connection.

 

 

●intermittent audible signal,

The dishwasher will not drain

 

● continuous flashing of the light of the

● Close the water tap and contact your

running programme,

local Service Force Centre.

●point-shaped optical signal is flashing,

● appears in the digital display,

●intermittent audible signal,

Anti-flood device is activated

Remember to switch off the appliance before carrying out any corrective action.

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Dishwasher ESL We were thinking of you Welcome to the world of Electrolux Contents Safety information General safetyCorrect use Child safety InstallationProduct description Control panel Indicator lights Salt Rinse aid Multi-tab functionSetting mode Audible signals Setting of the water softener End of programmeFactory setting Set the water softener First useIf you want to use combi detergent Clarke Mmol/lSetting manually Setting electronicallyExamples Filling with dishwasher salt To fillFirst time Filling with rinse aid Only use branded rinse aid for dishwashersDaily use Loading cutlery and dishesDaily use Lower basket Cutlery basket HandleUpper basket Adjusting the height of the upper basket Maximum height of the dishes in the lower basketUse of detergent Fill with detergentDetergent tablets Activation/deactivation of the Multi- tab function Activation/deactivation of the rinse aid dispenser Interrupt a washing programme in progress Cancelling the delay start End of the washing programmeUnloading the dishwasher Degree Washing programmes Programme Programme descriptionCare and cleaning Cleaning the filtersFrost precautions External cleaningInternal cleaning Moving the machinePossible cause and solution Something not workingMalfunction Dishes are not clean Dishes are wet and dull Wash results are not satisfactoryTechnical data KWh Consumption values ProgrammeMinutes LitresHints for test institutes Installation Fixing to the adjacent unitsLevelling Water supply connections Water inlet hose with safety valve Water outlet hose connection Plastic membrane a must beElectrical connection Environment concerns Packaging materialOld appliance Service and Spare Parts Guarantee/Customer ServiceStandard guarantee conditions 0870 5 929European guarantee Customer CareAlbania Electrolux Electrolux Page 117989 83/0-00-21022007
Top Page Image Contents