Electrolux ESL 66010 user manual Water inlet hose with safety valve

Page 38

38 electrolux installation

Water inlet hose with safety valve

After connecting the double-walled water inlet hose, the safety valve is next to the tap. Therefore the water inlet hose is only under pressure while the water is running. If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water.

Please take care when installing the water inlet hose:

●The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water.

●If water inlet hose or the safety valve is damaged, remove the mains plug immediately.

●A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre.

●Place the water inlet hose in such a way that it is never higher than the bottom edge of the safety valve.

Warning!

Dangerous voltage

Image 38

Contents Dishwasher ESL We were thinking of you Welcome to the world of Electrolux Contents Correct use Safety informationGeneral safety Child safety InstallationProduct description Control panel Indicator lights Salt Rinse aid Multi-tab functionSetting mode Factory setting Audible signalsSetting of the water softener End of programme Set the water softener First useIf you want to use combi detergent Clarke Mmol/lExamples Setting manuallySetting electronically First time Filling with dishwasher saltTo fill Filling with rinse aid Only use branded rinse aid for dishwashersDaily use Loading cutlery and dishesDaily use Lower basket Cutlery basket HandleUpper basket Adjusting the height of the upper basket Maximum height of the dishes in the lower basketDetergent tablets Use of detergentFill with detergent Activation/deactivation of the Multi- tab function Activation/deactivation of the rinse aid dispenser Interrupt a washing programme in progress Unloading the dishwasher Cancelling the delay startEnd of the washing programme Degree Washing programmesProgramme Programme descriptionCare and cleaning Cleaning the filtersFrost precautions External cleaningInternal cleaning Moving the machinePossible cause and solution Something not workingMalfunction Dishes are not clean Dishes are wet and dull Wash results are not satisfactoryTechnical data KWh Consumption values ProgrammeMinutes LitresHints for test institutes Levelling InstallationFixing to the adjacent units Water supply connections Water inlet hose with safety valve Water outlet hose connection Plastic membrane a must beElectrical connection Old appliance Environment concernsPackaging material Service and Spare Parts Guarantee/Customer ServiceStandard guarantee conditions 0870 5 929European guarantee Customer CareAlbania Electrolux Electrolux Page 117989 83/0-00-21022007