Electrolux ESL 66010 user manual Malfunction

Page 31

something not working

electrolux 31

The flashing of the point-shaped optical signal on the floor beneath the dishwasher’s door will not be visible if the appliance has been installed higher up with a furniture door mounted flush.

Malfunction

The programme does not start

Possible cause and solution

The dishwasher’s door has not been properly closed.

Close the door.

The main plug is not plugged in. Insert the main plug.

The fuse has blown out in the household fuse box.

Replace the fuse.

Delay start has been set.

If dishes are to be washed immediately, cancel the delay start.

Once these checks have been carried out; switch on the appliance, press the button of the programme that was running before the intervention of the alarm and close the dishwasher’s door.

The programme will continue from the point at which it was interrupted.

If the malfunction or fault code reappears contact the Service Force Centre.

For other fault codes not described in the above chart, please contact your Service Force Centre.

Contact your local Service Force Centre, quoting the model (Mod.), product number (PNC) and serial number (S.N.).

This information can be found on the rating plate located on the side of the dishwasher door.

So that you always have these numbers at hand, we recommend you to make a note of them here:

Mod. : . . . . . . . . . . . . . . . . . . . . . . .

PNC :. . . . . . . . . . . . . . . . . . . . . . . .

S.N. : . . . . . . . . . . . . . . . . . . . . . . . .

Image 31
Contents Dishwasher ESL We were thinking of you Welcome to the world of Electrolux Contents General safety Safety informationCorrect use Installation Child safetyProduct description Control panel Salt Rinse aid Multi-tab function Indicator lightsSetting mode Setting of the water softener End of programme Audible signalsFactory setting Clarke Mmol/l First useIf you want to use combi detergent Set the water softenerSetting electronically Setting manuallyExamples To fill Filling with dishwasher saltFirst time Only use branded rinse aid for dishwashers Filling with rinse aidLoading cutlery and dishes Daily useDaily use Lower basket Handle Cutlery basketUpper basket Maximum height of the dishes in the lower basket Adjusting the height of the upper basketFill with detergent Use of detergentDetergent tablets Activation/deactivation of the Multi- tab function Activation/deactivation of the rinse aid dispenser Interrupt a washing programme in progress End of the washing programme Cancelling the delay startUnloading the dishwasher Programme description Washing programmesProgramme DegreeCleaning the filters Care and cleaningMoving the machine External cleaningInternal cleaning Frost precautionsSomething not working Possible cause and solutionMalfunction Wash results are not satisfactory Dishes are not clean Dishes are wet and dullTechnical data Litres Consumption values ProgrammeMinutes KWhHints for test institutes Fixing to the adjacent units InstallationLevelling Water supply connections Water inlet hose with safety valve Plastic membrane a must be Water outlet hose connectionElectrical connection Packaging material Environment concernsOld appliance 0870 5 929 Guarantee/Customer ServiceStandard guarantee conditions Service and Spare PartsCustomer Care European guaranteeAlbania Electrolux Electrolux Page 117989 83/0-00-21022007