Brother XF0606-001 operation manual Printing, Specifying print settings

Arranging Embroidery Designs

Printing

Specifying print settings

Before printing, you may need to change the print settings for the embroidery design files.

1.Click 1, then 2, then 3.

1

3

2

2.Specify the print settings.

(2)

(1)

(3)(4)

(1)Specify the paper size.

(2)Specify the paper orientation.

(3)Print type

Actual Size:

Select this option to print the design at actual size and the sewing information (dimensions of the embroidery pattern, sewing color order, stitch count and hoop position) on separate pages.

Reduced Size:

Select this option to print a reduced image together with all of the above- mentioned information on a single page.

(4)Print option

Print sewing area box & center axes: Select this option to print black lines to indicate the sewing area and the center axes for the data. (This setting is only available when Actual Size is selected.)

Print template grid:

Select this check box to print green lines to represent the grid printed on the embroidery sheet included with the hoop.

Divide embroidery image into 2 pages: Select this check box to print at actual size and on A4- or Letter-size paper a design that is larger than the paper size by dividing it in two and printing each half on different pages.

(This setting is only available when Actual size is selected in the Print Setup dialog box and when the Design Page is set to the larger hoop sizes. This setting is not available if a User Hoop size is selected.)

With this split printing feature, /

or / is printed in the lower-right corner of the paper to indicate which half is printed.

(5)Stitch image

Normal:

Select this option to print the design as lines and dots.

Realistic:

Select this option to print a realistic image of the design. To change the settings of the realistic image, click Attributes.

c “Changingpage 41 realistic view settings” on

3.Click OK.

c “Changing the display of the embroidery design” on page 41.

54