Bosch Appliances LBB 3588 user manual Camera Installation window, Specifying the overview camera

USING DCN AUTOMATIC CAMERA CONTROL

The following window appears:

3

Fig. 6 The Camera Installation window

Specifying the overview camera

For AVS Camera 1 is always reserved for the overview. For DCC the high- est pre-position is reserved for the overview. The overview gives a general overview of the conference venue when all the microphones are off (and therefore no conference participant is on camera). In case of AVS the overview camera can also be used when a dome camera is moving from one preposition to another. It acts as the default camera, and is activated when no other camera is selected by the Allegiant video switcher in response to conference activity.

The overview camera can be either a fixed or dome camera. However, in single-camera configurations, the overview camera is always a dome camera with its last preposition showing the overview.

NOTE: When a dome camera is used as the overview camera, the ‘Cam- era movement time’ option is disabled.

If a fixed camera is used, the edit fields for seat (or unit) number and text are not displayed. It is not possible to assign this camera to a seat or unit. The following screen text is displayed:

‘This camera is reserved for the overview’

DCN Automatic Camera Control	Digital Congress Network
Software User Manual	Page 3-6