USING DCN AUTOMATIC CAMERA CONTROL
The Camera Installation window contains the following elements:
•Start/Stop push button. This is used to enter and exit Installation mode.
•Camera specification edit fields for entering camera number, camera ID, and the type of camera (fixed or preposition)
When installation mode is entered (by pressing the Start push button) for |
|
the first time i.e. when no cameras have yet been assigned to seat numbers, |
|
or when camera 1 is selected from the ‘Assignments’ list the installation win- |
|
dow appears as follows: | 3 |
Fig. 2 The Camera Installation window
NOTE: If a camera with prepositions (such as a dome camera) is selected, the number of prepositions available, and the selected preposition is also entered in this area.
•‘Selected preposition:’ edit field (only displayed if the camera is a preposi- tion type)
•DCN seat (or unit) edit fields for selecting a seat (or unit) number and entering one or two lines of seat/unit text
•‘Insert’ button for entering the camera and unit assignments specified (it then appears in the ‘Assignments’ list on the right side of the main win- dow)
Digital Congress Network | DCN Automatic Camera Control |
Page | Software User Manual |