Emerson CF1PW01, CF1WB01, CF1AB01 owner manual Position the ceiling cover trim and the ceiling cover

Page 5

7.If you have installed the 18” downrod, install the downrod trim and decorative bulb as follows (Figure 5). Slide the decorative trim (grommet-end first) over the downrod and seat the grommet firmly against the motor cover.

Then slide the

decorative bulb (oriented as shown) over the downrod, being certain that the downrod trim seats in the bottom

grommet of the decorative bulb.

18" DOWNROD

GROMMET

DECORATIVE

BULB

GROMMET

DOWNROD

TRIM

GROMMET

MOTOR COVER

Figure 5

12.Use the holes in the square recesses in the motor hub marked with "4" and install the blade assemblies in accordance with Steps 13 or 14.

13.FOUR-BLADE VERSION. Attach one blade assembly to the motor hub using two 10-32 x 5/8" oval head screws (supplied) (Figure 8). Do not tighten completely at this time. Install remaining blade assemblies in the same way. Gently snug all flange screws to the motor hub, working around the hub in a clockwise sequence. Next, securely tighten all flange screws, again working in a clockwise sequence. Failure to follow this procedure could result in fan wobble.

14° FOUR-BLADE FLANGE

8.

Position the ceiling cover trim and the ceiling cover

 

over the downrod. Be sure the cover is oriented

 

correctly, with the large opening at the top

 

(Figure 5).

9.

Reinstall the hanger ball on the downrod (Figure 6)

 

as follows. Route the motor leads through the

 

hanger ball and slide the hanger ball over the

 

downrod. Install the pin through the holes at top of

10-32 x 5/8"

OVAL HEAD SCREWS (2 PER BLADE FLANGE)

Figure 8

MOTOR HUB

the downrod and slide the hanger ball up the

downrod, aligning the ball so the pin is captured in

the groove in the top of the hanger ball. Pull the

hanger ball up tight against the pin and securely

tighten the setscrew in the hanger ball. A loose

setscrew could create fan wobble.

14.TWO-BLADE VERSION. Attach one blade assembly to the motor hub using four 10-32 x 5/8” oval head screws (supplied) (Figure 9). Install the other blade assembly in the same manner. Gently snug all flange screws to the motor hub. Make sure the ends of the flanges are engaged, then securely tighten all flange screws, working in a clockwise sequence.

PIN

HANGER BALL

DOWNROD

Figure 6

10. The fan comes with blue, black and white leads

that are 80” long. Before installing fan, measure

up approximately 6 to 9-inches above the ball/

20° TWO-BLADE FLANGE

10-32 x 5/8"

OVAL HEAD SCREWS (4 PER BLADE FLANGE)

Figure 9

MOTOR HUB

downrod assembly. Cut off excess leads and

strip back insulation 1/2-inch from end of leads.

11. Use five 10-32 x 3/8" pan head screws and flat

washers (supplied) to secure the flange to the

blade (Figure 7). Repeat for the remaining

blade(s).

10-32 x 3/8"

PAN HEAD SCREW (5)

FLAT WASHER (5)

BLADE

BLADE

FLANGE

!WARNING

To reduce the risk of personal injury, do not bend the blade flanges when installing the flanges, balancing the blades or cleaning the fan. Do not insert foreign objects between rotating fan blades.

15.Turn fan assembly over so the bottom is oriented up. Partially install two 8-32 x 1/2” screws (supplied) in the switch housing assembly (Figure 10). Slip the speed control switch chain through the hole in the upper cover trim, then position the cover trim on the switch housing assembly so that the two screws protrude through the key hole slots in the cover trim. Turn the cover trim fully clockwise and then securely tighten the two 8-32 x 1/2” screws.

Figure 7

5

Image 5
Contents Date Code CF1AB01 CF1WB01 CF1PW01Materials General Information Unpacking InstructionsAssembly Instructions Position the ceiling cover trim and the ceiling cover Turn How to Hang Your Ceiling FanElectrical Requirements How to Wire Your Ceiling Fan Attaching Light Kit Using Your Ceiling FanTHREE-SPEEDSWITCH Trouble Shooting MaintenanceAccessoriesImportant Care Instructions For your Ceiling FanPart Number Part Description Name of Item Model Number Repair PartsHow to Order Repair Parts Part Numbers Key Model No Description Repair Parts ListingWhat Will Emerson Company Do To Correct Problems What The Warranty CoversHow Can You Get Service What Is Not Covered

CF1PW01, CF1AB01, CF1WB01 specifications

The Emerson CF1PW01, CF1WB01, and CF1AB01 ceiling fans are a trio of innovative and stylish ceiling fans designed to enhance both comfort and aesthetic appeal in various indoor spaces. Each model showcases Emerson’s commitment to quality, combining cutting-edge technology with elegant designs.

Starting with the CF1PW01, this model stands out with its striking white finish that can seamlessly blend into a variety of decor styles. It features a powerful motor that ensures efficient airflow distribution, which is critical for maintaining the perfect temperature during both summer and winter months. The fan also comes equipped with a remote control, offering ease of operation and allowing users to adjust fan speed and lighting without the need to get up. The energy efficiency of the CF1PW01 makes it a great choice for those looking to reduce their energy bills while enjoying a comfortable living environment.

Next, the CF1WB01 brings a touch of classic elegance with its rich wood finish, making it an ideal choice for traditional and rustic interiors. It is designed with durability in mind, featuring high-quality materials that ensure longevity. The CF1WB01 employs advanced technology for whisper-quiet operation, allowing it to circulate air without disruptive noise. This model also includes multiple speed settings and is compatible with smart home systems, enabling users to control their fan through voice commands or mobile applications.

Lastly, the CF1AB01 offers a modern twist with its brushed steel finish, perfect for contemporary homes. This fan is equipped with a unique aerodynamic blade design that maximizes airflow, creating a refreshing breeze throughout the room. Like its counterparts, the CF1AB01 utilizes an energy-efficient motor, which not only helps in reducing electricity use but also extends the lifespan of the fan. The model also includes integrated LED lighting that provides ample illumination, enhancing functionality without compromising style.

In summary, the Emerson CF1PW01, CF1WB01, and CF1AB01 ceiling fans combine advanced features, stylish designs, and energy-efficient technologies to cater to diverse preferences and needs. Whether you prefer a classic, contemporary, or minimalist aesthetic, these models provide versatile options for enhancing home comfort and decor. With easy installation, user-friendly controls, and whisper-quiet operation, Emerson ceiling fans are a top choice for anyone looking to elevate their indoor spaces.