Electrical Requirements

BP7358 RUSTICO CF160 9/19/07 11:23 AM Page 5

2. Slide the four switch levers on the code switch to your choice of ON (up) or down positions. Use a ball-point pen or small screwdriver and slide the levers firmly up or down.

3. In the receiver (Figure 1), slide the four switch levers to the same positions as set in the transmitter. Make sure the levers on both switches are in the same positions, otherwise the fan will not operate.

4. Position the battery in the transmitter battery compartment and replace the battery cover.

CEILING FAN

PROCEDURES

Your new ceiling fan will require a ground- ed electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit.

The outlet box must be securely anchored and capable of withstanding a load of at least 50 pounds.

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support”, and use screws sup- plied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electri- cian if in doubt.

!WARNING

Turning off wall switch is not suffi- cient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse or circuit breaker box before wiring. All wiring must be in accordance with National and Local codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock.

How to Assemble Your Ceiling Fan

1. Place the motor housing assembly on a flat surface with the top of the motor facing upwards. Place the upper glass over the motor housing assembly, aligning the slots in the upper glass with the mounting holes in the housing flange (Figure 2). Install three 8-32 x 15mm screws, flat washers, and rubber washers (supplied) to secure the assembly.

2. Place the motor housing/upper glass assembly onto the lower foam pad with the bottom of the motor facing you. The lower pad serves as a holder for the fan during the first stages of assembly.

8-32 x 15mm SCREW (3) FLAT WASHER (3)

RUBBER WASHER (3)

UPPER GLASS

MOTOR HOUSING

ASSEMBLY

To avoid possible fire or shock, fol- low all wiring instructions carefully.

Any electrical work not described in these instructions should be done or approved by a licensed electrician.

If your fan is to replace an existing ceiling light fixture, turn electricity off at the main fuse box at this time and remove the exist- ing light fixture.

Figure 2

3. Mount the fan blades to the blade flanges using three 10-24 x 9mm truss head screws and three fiber washers (supplied) (Figure 3).

5	U.L. Model No.: CF160

CF160 specifications

The Emerson CF160 is a sophisticated and versatile centrifugal fan designed specifically for various industrial applications. Renowned for its efficiency and reliability, the CF160 integrates advanced technologies that make it an ideal choice for air handling and ventilation systems.

One of the key features of the Emerson CF160 is its compact design, which allows for easy installation in spaces with limited room. Despite its small footprint, the CF160 can deliver an impressive air volume, making it suitable for use in commercial buildings, manufacturing facilities, and HVAC systems.

The fan is equipped with an energy-efficient motor that meets stringent environmental standards. This not only reduces operational costs but also supports sustainability efforts by minimizing energy consumption. The motor operates quietly, ensuring that the CF160 can be utilized in noise-sensitive environments without causing disruptions.

The CF160 boasts a robust construction, using high-quality materials that enhance its durability and longevity. The fan's housing is designed to withstand harsh conditions, making it suitable for both indoor and outdoor applications. Additionally, the components are engineered to resist corrosion, ensuring the fan's reliability over time.

Another notable characteristic of the Emerson CF160 is its adjustable airflow capability. Operators can easily modify the fan's settings to achieve the desired air movement, providing flexibility in various applications. This feature is particularly beneficial in environments where air flow requirements can change frequently.

The CF160 utilizes cutting-edge aerodynamic technology, allowing for optimized airflow and performance. The fan blades are designed to maximize efficiency, reducing turbulence and ensuring smooth operation. This design contributes not only to improved performance but also to reduced maintenance needs, further enhancing the fan's appeal.

Furthermore, the Emerson CF160 is equipped with advanced control systems that allow for seamless integration into smart building technologies. This enables real-time monitoring and management of airflow, ensuring optimal performance and energy usage.

In summary, the Emerson CF160 is a top-tier centrifugal fan characterized by its compact design, energy-efficient motor, durable construction, adjustable airflow, and advanced control technologies. It stands out as a reliable and efficient solution for various industrial and commercial ventilation needs, providing superior performance while supporting sustainability efforts.