How to Hang, Your Ceiling Fan | Emerson CF160 specs

BP7358 RUSTICO CF160 9/19/07 11:23 AM Page 8

13. The fan comes with blue, orange, black and white leads that are 80” long. Before installing the fan, measure up approxi- mately 6 to 9-inches above top of hanger ball/downrod assembly. Cut off excess leads and strip back insulation 1/2” from end of leads.

14. Screw the three 40-watt (maximum) can- delabra base round bulbs into the sock- ets in the motor housing (Figure 7).

15. You have now completed the initial assembly of your new ceiling fan. You can now proceed with hanging and wiring your fan.

1. Securely attach the hanger bracket to the outlet box using the two screws supplied with the outlet box (Figure 10).

!WARNING

Hanger bracket must seat firmly against outlet box. If the outlet box is recessed, remove wall board until bracket contacts box. If bracket and/or outlet box are not securely attached, the fan could wobble or fall.

OUTLET

BOX

How to Hang	TWO SCREWS
Your Ceiling Fan	SUPPLIED
Your Ceiling Fan	WITH
	OUTLET BOX	HANGER
! WARNING	Figure 10	BRACKET
	Figure 10	TAB
		TAB

The fan must be hung with at least 7' of clearance from floor to blades (Figure 9).

CEILING

AT LEAST

Figure 9

FLOOR

!WARNING

The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs. Use only a U.L. outlet box listed as “Acceptable for Fan Support”.

2.Carefully lift the fan and seat the hang- er ball/downrod assembly on the hang- er bracket that was just attached to the outlet box (Figure 11). Be sure the groove in the ball is lined up with the tab on the hanger bracket (Figure 10).

!WARNING

Failure to seat tab in groove could cause damage to electrical wires and possible shock or fire hazard.

NOTE: CEILING COVER, SUPPLY WIRES AND FAN WIRES OMITTED FOR CLARITY.

OUTLET

BOX

HANGER

BRACKET

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support”, and use screws sup-

Figure 11

HANGER BALL/ DOWNROD ASSEMBLY

plied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electri- cian if in doubt.

!WARNING

To avoid possible fire or shock, do not pinch wires between the hanger ball/downrod assembly and hanger bracket.

8	U.L. Model No.: CF160

CF160 specifications

The Emerson CF160 is a sophisticated and versatile centrifugal fan designed specifically for various industrial applications. Renowned for its efficiency and reliability, the CF160 integrates advanced technologies that make it an ideal choice for air handling and ventilation systems.

One of the key features of the Emerson CF160 is its compact design, which allows for easy installation in spaces with limited room. Despite its small footprint, the CF160 can deliver an impressive air volume, making it suitable for use in commercial buildings, manufacturing facilities, and HVAC systems.

The fan is equipped with an energy-efficient motor that meets stringent environmental standards. This not only reduces operational costs but also supports sustainability efforts by minimizing energy consumption. The motor operates quietly, ensuring that the CF160 can be utilized in noise-sensitive environments without causing disruptions.

The CF160 boasts a robust construction, using high-quality materials that enhance its durability and longevity. The fan's housing is designed to withstand harsh conditions, making it suitable for both indoor and outdoor applications. Additionally, the components are engineered to resist corrosion, ensuring the fan's reliability over time.

Another notable characteristic of the Emerson CF160 is its adjustable airflow capability. Operators can easily modify the fan's settings to achieve the desired air movement, providing flexibility in various applications. This feature is particularly beneficial in environments where air flow requirements can change frequently.

The CF160 utilizes cutting-edge aerodynamic technology, allowing for optimized airflow and performance. The fan blades are designed to maximize efficiency, reducing turbulence and ensuring smooth operation. This design contributes not only to improved performance but also to reduced maintenance needs, further enhancing the fan's appeal.

Furthermore, the Emerson CF160 is equipped with advanced control systems that allow for seamless integration into smart building technologies. This enables real-time monitoring and management of airflow, ensuring optimal performance and energy usage.

In summary, the Emerson CF160 is a top-tier centrifugal fan characterized by its compact design, energy-efficient motor, durable construction, adjustable airflow, and advanced control technologies. It stands out as a reliable and efficient solution for various industrial and commercial ventilation needs, providing superior performance while supporting sustainability efforts.