How to Wire Your Ceiling Fan

BP7358 RUSTICO CF160 9/19/07 11:23 AM Page 9

2. Refer to Figure 12 and 13 and connect the receiver wires to the supply wires and the fan motor wires as follows:

If you feel that you do not have enough electrical wiring knowledge or experi- ence, have your fan installed by a licensed electrician.

!WARNING

Turning off wall switch is not suffi- cient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse or circuit breaker box before wiring. All wiring must be in accordance with National and Local codes and the ceiling fan must be properly grounded as a precau- tion against possible electrical shock.

CAUTION: To reduce the risk of electri- cal shock, disconnect the electrical supply circuit before installing the fan, light kit or receiver.

1. Position the supply wires to the left side of the outlet box (Figure 12); position the fan wires to the right side. Partially insert the remote control receiver (flat side up) until one end rests on the hanger ball as shown in Figure 12.

NOTE: Make all wiring connections using wire connectors (supplied). Make sure that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire.

a.Securely connect the green grounding wires from the hanger ball and the hanger bracket to the supply grounding conductor (this may be a bare wire or a wire with green insulation).

b.Securely connect the supply white (neutral) wire to the receiver white (AC IN N) wire.

c.Securely connect the supply black wire (hot) wire to the receiver black (AC IN

L)wire.

d.Securely connect the fan motor white wire to the receiver white (TO MOTOR

N)wire.

e.Securely connect the fan motor black wire to the receiver black (TO MOTOR

L)wire.

f.Securely connect the fan motor blue wire to the receiver blue (FOR BOTTOM LIGHT) wire.

g.Securely connect the fan motor orange wire to the receiver orange (FOR UPPER LIGHT) wire.

!WARNING

Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire con- nectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

	SUPPLY WHITE WIRE
	(NEUTRAL)
SUPPLY BLACK	A
	C I
WIRE (HOT)	N	N
WIRE (HOT)		N
GROUND WIRE
GREEN GROUND WIRE		AC IN L
GREEN GROUND WIRE
FROM HANGER BALL
ANTENNA
GREEN GROUND WIRE		FAN BLACK
FROM HANGER BRACKET		WIRE
1-1/4" THREADED	FAN BLUE WIRE
STUD (2)	FAN WHITE WIRE

Figure 12

RECEIVER WHITE

WIRE

RECEIVER BLACK WIRE

RECEIVER BLACK

WIRE

RECEIVER

BLUE WIRE

		LIGHT		MOTOR	L		LIGHT
MOTOR	N	BOTTOM		MOTOR		UPPER
			TO		FOR	UPPER	RECEIVER
			TO				RECEIVER
TO		FOR					ORANGE WIRE

FAN ORANGE

WIRE

RECEIVER WHITE

WIRE

9	U.L. Model No.: CF160

CF160 specifications

The Emerson CF160 is a sophisticated and versatile centrifugal fan designed specifically for various industrial applications. Renowned for its efficiency and reliability, the CF160 integrates advanced technologies that make it an ideal choice for air handling and ventilation systems.

One of the key features of the Emerson CF160 is its compact design, which allows for easy installation in spaces with limited room. Despite its small footprint, the CF160 can deliver an impressive air volume, making it suitable for use in commercial buildings, manufacturing facilities, and HVAC systems.

The fan is equipped with an energy-efficient motor that meets stringent environmental standards. This not only reduces operational costs but also supports sustainability efforts by minimizing energy consumption. The motor operates quietly, ensuring that the CF160 can be utilized in noise-sensitive environments without causing disruptions.

The CF160 boasts a robust construction, using high-quality materials that enhance its durability and longevity. The fan's housing is designed to withstand harsh conditions, making it suitable for both indoor and outdoor applications. Additionally, the components are engineered to resist corrosion, ensuring the fan's reliability over time.

Another notable characteristic of the Emerson CF160 is its adjustable airflow capability. Operators can easily modify the fan's settings to achieve the desired air movement, providing flexibility in various applications. This feature is particularly beneficial in environments where air flow requirements can change frequently.

The CF160 utilizes cutting-edge aerodynamic technology, allowing for optimized airflow and performance. The fan blades are designed to maximize efficiency, reducing turbulence and ensuring smooth operation. This design contributes not only to improved performance but also to reduced maintenance needs, further enhancing the fan's appeal.

Furthermore, the Emerson CF160 is equipped with advanced control systems that allow for seamless integration into smart building technologies. This enables real-time monitoring and management of airflow, ensuring optimal performance and energy usage.

In summary, the Emerson CF160 is a top-tier centrifugal fan characterized by its compact design, energy-efficient motor, durable construction, adjustable airflow, and advanced control technologies. It stands out as a reliable and efficient solution for various industrial and commercial ventilation needs, providing superior performance while supporting sustainability efforts.