How to Put Your Ceiling Fan Together

1.Remove the hanger ball by loosening the setscrew in the hanger ball until the ball falls freely down the downrod (Figure 1). Remove the clevis pin from the downrod, then remove the hanger ball. Retain the pin and hanger ball for reinstallation in step 5.

HANGER

4.Make sure the grommet is properly installed in the coupling cover then slide the coupler cover on the downrod until it rests on the motor housing. Place the ceiling cover over the downrod. Be sure both the ceiling cover and the coupler cover are oriented correctly (Figure 3).

BALL

SETSCREW

DOWNROD

Figure 1

2. Loosen setscrew in motor coupling if necessary.

Separate, untwist and unkink the three 80” motor

leads. Route the motor lead wires through the

downrod. Align the clevis pin holes in the downrod

CEILING

COVER

COUPLER

COVER

CLEVIS

SETSCREW

MOTOR

COUPLING

Figure 3

CLEVIS

HAIRPIN CLIP

with the holes in the motor coupling. Install the

clevis pin and secure with the hairpin clip (Figure

2). The clevis pin must go through the holes in the

motor coupling and the holes in the downrod. Be

sure to push the straight leg of the hairpin clip

through the hole near the end of the clevis pin until

the curved portion of the hairpin clip snaps around

the clevis pin. The hairpin clip must be properly

installed to prevent the clevis pin from working

loose. Pull on the downrod to make sure the clevis

pin is properly installed.

!WARNING

It is critical that the clevis pin in the motor coupling is properly installed and the setscrew securely tightened. Failure to verify that the pin and setscrew are properly installed (as shown in Figure 2) could result in the fan falling.

5.Reinstall the hanger ball (Figure 4) on the downrod as follows. Route the motor leads through the downrod. Position the pin through the two holes in the downrod and align the ball so the pin is captured in the groove in the top of the hanger ball. Pull the hanger ball up tight against the pin and securely tighten the setscrew in the hanger ball. A loose setscrew could create fan wobble.

!WARNING

It is critical that the pin in the hanger ball is properly installed and the setscrew securely tightened. Failure to verify that the pin and setscrew are properly installed could result in the fan falling.

HANGER

BALL

SETSCREW

DOWNROD

SETSCREW

CLEVIS PIN

Figure 2

DOWNROD

HAIRPIN

CLIP

MOTOR

COUPLING

CEILING COVER

Figure 4

6. The fan comes with blue, black and white leads

that are 80” long. Before installing fan, measure up

approximately 6 to 9-inches above top of hanger

ball/downrod assembly. Cut off excess leads and

strip back insulation 1/2-inch from end of leads.

3.While pulling up on the downrod, securely tighten the setscrew in the motor coupling (Figure 3).

NOTE: The setscrew must be properly installed as described above, or fan wobble could result.

7. Turn fan assembly upside down in preparation for

mounting fan blade assemblies.

CF929WW 00, CF929BS 00 specifications

The Emerson CF929BS and CF929WW ceiling fans are exemplary models that combine functionality with aesthetic appeal, making them ideal choices for both modern and traditional home decor. These fans are specially crafted with sleek designs and innovative technologies that stand out in the market.

One of the main features of the Emerson CF929 series is its powerful yet efficient motor. The fans are equipped with a robust motor that provides excellent airflow, effectively cooling spacious rooms while consuming minimal electricity. This energy efficiency is significant for homeowners looking to reduce their energy bills while maintaining comfort.

The CF929BS model comes in a striking brushed steel finish, while the CF929WW variant features a classic white color, offering versatile options for various interior styles. Both models are designed with a contemporary silhouette that complements a range of decorative themes, from modern minimalism to rustic charm.

Installation is made easy with the included downrod, which allows the fan to be hung at the optimal height for effective air distribution. Additionally, both models can be paired with a compatible remote control, allowing users to adjust settings such as speed and lighting from the comfort of their seat.

Versatility is another strong selling point of the Emerson CF929 series. These fans are equipped with a reversible motor, enabling users to change the airflow direction. In the summer, the fan circulates cool air downward, while in the winter, it reverses to create an updraft that helps distribute warm air, ensuring comfort all year round.

The CF929 fans also feature integrated LED lighting, providing bright and efficient illumination. The bulbs are long-lasting, and the fixture design allows for even light distribution, making them perfect for use in living rooms, bedrooms, or dining areas.

Another noteworthy characteristic is the quiet operation. The fans are designed to operate silently, allowing for a peaceful environment free from bothersome noises.

In summary, the Emerson CF929BS and CF929WW ceiling fans showcase a blend of style, technology, and performance. With their energy-efficient motors, stylish finishes, remote control compatibility, and versatile airflow options, they are exceptional additions to any home looking to enhance comfort and elegance.