Emerson CF929BS 00, CF929WW 00 owner manual Electrical Requirements, How to Hang Your Ceiling Fan

Page 5

8.To ensure proper blade assembly, make sure the label on the blades are facing the bottom of the ceiling fan. Slide blade through center slot in fan housing. Mount blade to fan housing using three 3/16-24 x 1/2” slotted Phillips washer head blade screws (Figure 5).

MOTOR HUB

BLADE SLOT

IN HOUSING

3/16-24 x 1/2" SLOTTED PHILLIPS WASHER HEAD BLADE SCREWS

FAN BLADE

LABEL

Figure 5(LOCATED ON BOTTOM OF BLADE)

NOTE: Take care not to scratch fan housing when installing blades.

9.Remove two of the four screws in the motor assembly and loosen the remaining two screws (Figure 6).

10.Connect the terminals of the lower housing assembly to the terminals of the fan motor assembly (Figure 6).

Electrical Requirements

Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit.

The outlet box must be securely anchored and capable of withstanding a load of at least 50 pounds.

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked acceptable for fan support, and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

If your fan is to replace an existing ceiling light fixture, turn electricity off at the main fuse box at this time and remove the existing light fixture.

!WARNING

Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with National and Local codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock.

Figure 6

LOWER

HOUSING

ASSEMBLY

TERMINALS

FAN MOTOR

ASSEMBLY

REMOVE

2 SCREWS

LOOSEN

2 SCREWS

!WARNING

To avoid fire or shock, follow all wiring instructions carefully.

Any electrical work not described in these instructions should be done or approved by a licensed electrician.

How to Hang Your

Ceiling Fan

!WARNING

11.Attach the lower housing assembly to the fan motor using the two key slot holes. (Figure 7). Secure the lower housing assembly by tightening the two screws. Reinstall the two screws that were removed.

NOTE: Make sure wires and terminals are positioned in raised center area of lower housing assembly, and not pinched between fan and light kit.

 

LOWER

 

HOUSING

 

ASSEMBLY

RAISED CENTER

KEY

AREA OF LIGHT

SLOT

KIT HOUSING

HOLE (2)

SCREWS (2)

 

The fan must be hung with at least 7' of clearance from floor to blades (Figure 8).

CEILING

AT LEAST

7'

Figure 8

FLOOR

!WARNING

The outlet box must be securely anchored and capable of withstanding a load of at least 50 lbs.

Figure 7

5

 

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Midway Additional Safety Instructions for Installation Safety InstructionsCheck to see that you have received the following parts Unpacking InstructionsUp to 50 ft 50-100 ft How to Put Your Ceiling Fan Together Electrical Requirements How to Hang Your Ceiling FanHanger bracket How to Wire Your Ceiling FanPreset Memory Feature Installing Glass GlobeSetting Remote Control Operating Frequency Setting Transmitter FrequencySetting Receiver Frequency Using Your Ceiling FanOperation of Your Remote Control Trouble Probable Cause Suggested Remedy Trouble ShootingDownrod Extension Kits see store or catalog MaintenanceAccessoriesRepair Parts Repair Parts Listing

CF929WW 00, CF929BS 00 specifications

The Emerson CF929BS and CF929WW ceiling fans are exemplary models that combine functionality with aesthetic appeal, making them ideal choices for both modern and traditional home decor. These fans are specially crafted with sleek designs and innovative technologies that stand out in the market.

One of the main features of the Emerson CF929 series is its powerful yet efficient motor. The fans are equipped with a robust motor that provides excellent airflow, effectively cooling spacious rooms while consuming minimal electricity. This energy efficiency is significant for homeowners looking to reduce their energy bills while maintaining comfort.

The CF929BS model comes in a striking brushed steel finish, while the CF929WW variant features a classic white color, offering versatile options for various interior styles. Both models are designed with a contemporary silhouette that complements a range of decorative themes, from modern minimalism to rustic charm.

Installation is made easy with the included downrod, which allows the fan to be hung at the optimal height for effective air distribution. Additionally, both models can be paired with a compatible remote control, allowing users to adjust settings such as speed and lighting from the comfort of their seat.

Versatility is another strong selling point of the Emerson CF929 series. These fans are equipped with a reversible motor, enabling users to change the airflow direction. In the summer, the fan circulates cool air downward, while in the winter, it reverses to create an updraft that helps distribute warm air, ensuring comfort all year round.

The CF929 fans also feature integrated LED lighting, providing bright and efficient illumination. The bulbs are long-lasting, and the fixture design allows for even light distribution, making them perfect for use in living rooms, bedrooms, or dining areas.

Another noteworthy characteristic is the quiet operation. The fans are designed to operate silently, allowing for a peaceful environment free from bothersome noises.

In summary, the Emerson CF929BS and CF929WW ceiling fans showcase a blend of style, technology, and performance. With their energy-efficient motors, stylish finishes, remote control compatibility, and versatile airflow options, they are exceptional additions to any home looking to enhance comfort and elegance.
Top Page Image Contents