How to Wire Your Ceiling Fan, Hanger bracket

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked acceptable for fan support, and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

1.Securely attach the hanger bracket to the outlet box using the two screws supplied with the outlet box. (Figure 9.)

OUTLET

BOX

HANGER

BRACKET

	TWO SCREWS
	SUPPLIED WITH	TAB
	OUTLET BOX	TAB
	OUTLET BOX
	Figure 9

!WARNING

Hanger bracket must seat firmly against outlet box. If the outlet box is recessed, remove wall board until bracket contacts box. If bracket and/or outlet box are not securely attached, the fan could wobble or fall.

2.Carefully lift the fan and seat the hanger ball/downrod assembly on the hanger bracket that was just attached to the outlet box (Figure 10). Be sure the groove in the ball is lined up with tab on the hanger bracket (Figure 9).

!WARNING

Failure to seat tab in groove could cause damage to electrical wires and possible shock or fire hazard.

!WARNING

To avoid possible fire or shock, do not pinch wires between the hanger ball/downrod assembly and

How to Wire Your Ceiling Fan

If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.

1.Your ceiling fan is supplied with an Emerson Fan/Light Control. Wire your ceiling fan in accordance with the Owner’s Manual supplied with the Fan/Light Control. After splices have been made, carefully push splices up into the outlet box.

!WARNING

Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

2.After completion of wiring, install the ceiling cover as follows. Screw the two 1-1/4” threaded studs (provided) into the tapped holes in the hanger bracket.

3.Lift the ceiling cover up to the threaded studs and turn until studs protrude through the holes in the ceiling cover (Figure 11).

4.Secure the ceiling cover in place by sliding lockwashers over the threaded studs and installing the two knurled knobs (supplied). (Figure 11.) Tighten the knurled knobs securely until the ceiling cover fits snugly against the ceiling and the hole in the ceiling cover is clear of the downrod. Your fan is now wired to be turned on and off from the fan switch.

1-1/4"

THREADED STUD

hanger bracket.

	NOTE: CEILING COVER,
	SUPPLY WIRES AND	OUTLET
	FAN WIRES OMITTED	OUTLET
	FAN WIRES OMITTED	BOX
	FOR CLARITY.	BOX
	FOR CLARITY.

LOCKWASHERS (2)

KNURLED KNOB

Figure 11

CEILING COVER

	HANGER
	BRACKET
Figure 10	HANGER BALL/
	DOWNROD ASSEMBLY

!WARNING

To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.

CF929WW 00, CF929BS 00 specifications

The Emerson CF929BS and CF929WW ceiling fans are exemplary models that combine functionality with aesthetic appeal, making them ideal choices for both modern and traditional home decor. These fans are specially crafted with sleek designs and innovative technologies that stand out in the market.

One of the main features of the Emerson CF929 series is its powerful yet efficient motor. The fans are equipped with a robust motor that provides excellent airflow, effectively cooling spacious rooms while consuming minimal electricity. This energy efficiency is significant for homeowners looking to reduce their energy bills while maintaining comfort.

The CF929BS model comes in a striking brushed steel finish, while the CF929WW variant features a classic white color, offering versatile options for various interior styles. Both models are designed with a contemporary silhouette that complements a range of decorative themes, from modern minimalism to rustic charm.

Installation is made easy with the included downrod, which allows the fan to be hung at the optimal height for effective air distribution. Additionally, both models can be paired with a compatible remote control, allowing users to adjust settings such as speed and lighting from the comfort of their seat.

Versatility is another strong selling point of the Emerson CF929 series. These fans are equipped with a reversible motor, enabling users to change the airflow direction. In the summer, the fan circulates cool air downward, while in the winter, it reverses to create an updraft that helps distribute warm air, ensuring comfort all year round.

The CF929 fans also feature integrated LED lighting, providing bright and efficient illumination. The bulbs are long-lasting, and the fixture design allows for even light distribution, making them perfect for use in living rooms, bedrooms, or dining areas.

Another noteworthy characteristic is the quiet operation. The fans are designed to operate silently, allowing for a peaceful environment free from bothersome noises.

In summary, the Emerson CF929BS and CF929WW ceiling fans showcase a blend of style, technology, and performance. With their energy-efficient motors, stylish finishes, remote control compatibility, and versatile airflow options, they are exceptional additions to any home looking to enhance comfort and elegance.