Error Codes
Appendix B Error Codes
The following error codes are generated by MATWorX 32 and displayed in the Error text box on the MATWorX 32 Taskbar. These messages indicate processing errors generated in the PBX or the PAM while performing tasks within MATWorX 32.
All error codes contain five digits, the first two beginning with 10. The remaining three digits are divided into four series beginning with 100, 200, 300, or 400.
•Series 100 errors are generated by the PBX Interface Class, indicating an error occurred inside the PBX while performing a requested operation.
•Series 200 errors are currently not implemented.
•Series 300 errors are generated by the PDQ Comm Class, indicating a communication error occurred while talking with the PBX.
•Series 400 errors are generated by the Save/Load/ Verify (SLV) Class, indicating an error occurred while performing a save, load, or backup operation.
Series 100 Error Codes
No Error (Message 10100)
Object Not Registered (Error 10101)
Port Not Open (Error 10102)
Port Not Selected (Error 10103)
Failed to Connect (Error 10104)
Data Error (Error 10105)
Digit Error (Error 10106)
Time Out (Error 10107)
Checksum Error (Error 10108)
No File Defined (Error 10109)
MATWorX 32 User’s Guide |
|
Page 65 |