| TECHNICAL DATA |
Technical data | K3600 MKII |
Blade diameter, mm/inches | 350/14” |
Cutting depth, mm/inches | 260/10” |
Max. peripheral speed, m/s / r/min | 55/3000 |
Max.motor speed, r/min | 17000 |
Hydraulic motor | Geared motor (open centre valve) |
Max. hydraulic pressure, bar/ (psi) | 150 / 2200 |
Oil flow, | |
Height, mm/inches | 410 |
Length, mm/inches | 715 |
Width, mm/inches | 260 |
Weight, excl. blade, kg | 8,3 |
Weight ring blade, kg | 0,8 |
Specifications hydraulic oil* | 150 VG 32 (10W)** |
Oil temperature (operational), °C | 60 |
Water consumption, l/min | 4 |
Hydraulic couplings | 1/2' FF according to HTMA regulations. (thread 3/8') |
*We recommend the use of environmentally approved hydraulic oil.
**With high ambient temperatures use oil with a higher viscosity.
Noise emissions (see note 1) |
|
Sound power level, measured dB(A) | 110 |
Sound power level, guaranteed LWA dB(A) | 111 |
Sound levels (see note 2) |
|
Sound pressure level at the operators ear, dB(A) | 99 |
Vibration levels (see note 3) |
|
Front handle, m/s2 | 4,3 |
Rear handle, m/s2 | 6,0 |
Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.
Note 2: Noise pressure level according to EN
Note 3: Vibration level according to EN
Extending the hydraulic hoses
When extending the hydraulic hoses, the inside diameter of the hose must be increased according to the table to counteract power loss.
Extension, m | Inside diameter of the hydraulic hose, inches |
|
|
Up to 30 m | 1/2 |
|
|
5/8 | |
|
|
3/4 | |
|
|
20 – English