Husqvarna K 3600 MKII manual Safety Instructions, Steps before using a new power cutter, Switch

Page 5

SAFETY INSTRUCTIONS

Steps before using a new power cutter.

This machine is a hydraulically operated power cutter intended for free-hand cutting. The machine should be connected to a hydraulic unit with an oil flow of 35-42 litres/min and a maximum pressure of 150 bar.

Please read the operator’s manual carefully.

Check the cutting blade’s mounting, see the chapter ”Assembly”.

Let your Husqvarna dealer check the power cutter and make essential adjustments and repairs.

!

WARNING! Under no circumstances may the

design of the machine be modified without

the permission of the manufacturer. Always

 

use genuine accessories. Non-authorized

 

modifications and/or accessories can result

 

in serious personal injury or the death of the

 

operator or others.

WARNING! Use of products which cut, grind,

!drill, sand or shape material can generate dust and vapors which may contain harmful chemicals. Know the nature of the material being worked on and wear appropriate dust mask or respirator protection.

WARNING! A power cutter is a dangerous

!tool if used carelessly or incorrectly and can cause serious, even fatal injuries. It is extremely important that you read and understand the contents of this Operator’s Manual.

Husqvarna Construction Products has a policy of continuous product development. Husqvarna reserves the right to modify the design and appearance of products without prior notice and without further obligation introduce design modifications.

All information and all data in the Operator’s Manual were applicable at the time the Operator’s Manual was sent to print.

Personal protective equipment

WARNING! You must use approved personal

!protective equipment whenever you use the machine. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your dealer for help in choosing the right equipment.

Protective helmet

Hearing protection

Protective goggles or a visor

Breathing mask

Heavy-duty, firm grip gloves.

Tight-fitting, heavy-duty and comfortable clothing that permits full freedom of movement.

Use leg-guards recommended for the material to be cut.

Boots with steel toe-caps and non-slip sole

Always have a first aid kit nearby.

Machine′s safety equipment

This section describes the machine′s safety equipment, its purpose, and how checks and maintenance should be carried out to ensure that it operates correctly. See the ”What is what?” section to locate where this equipment is positioned on your machine.

!

WARNING! Never use a machine that has

faulty safety equipment! Carry out the

inspection, maintenance and service

 

routines listed in this section.

Switch

The switch is used to start and stop the machine.

English – 5

Image 5
Contents English MkiiKey to symbols KEY to SymbolsContents What is what on the power cutter? What is WHAT?Steps before using a new power cutter Safety InstructionsMachine′s safety equipment SwitchChecking the starting and stopping functions of the switch Switch lock and ON/OFF valve for the waterChecking the switch lock Blade guardBasic safety rules General safety precautionsGeneral working instructions Checking the blade guardCutting technique CuttingHow to avoid kickback Sticks to the blade Diamond bladesBasic service Settings and AdjustmentsDrive Fitting the bladeSettings and Adjustments Water hose Hydraulic hosesWater supply Water dosageStarting and stopping Starting and StoppingStarting StoppingMaintenance MaintenanceDismantling the complete guide roller Assembling the complete guide rollerReplacing the support rollers/guide rollers Drive wheelReconstructing the blade Couplings Blades conforming to EN13236 Maintenance scheduleMechanics Trouble ShootingSymptom Probable cause Extending the hydraulic hoses Technical DataEC-declaration of conformity ´z+UBT¶6A¨ Page Original instructions 1153345-26 ´z+UBT¶6A¨ ´z+UBT¶6A¨