KEY TO SYMBOLS
Symbols
WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others.
Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
Always wear:
•A protective helmet where there is a risk of
falling objects
• Approved hearing protection
•Protective goggles or a visor
This product is in accordance with applicable
EC directives.
This machine is not electrically insulated. If the machine touches or comes close to
death or serious bodily injury. Electricity can jump from one point to another by arcing. The higher the voltage, the greater
the distance electricity can jump. Electricity can also travel through branches and other objects, especially if
they are wet. Always keep a distance of at least 10 m between the machine and
This machine has a long reach. Make sure that no people or animals come closer than 15 m when the machine is running.
Always wear approved protective gloves.
Wear sturdy,
Other symbols/decals on the machine refer to special certification requirements for certain markets.
The engine is switched off by moving the stop
switch to the stop position. CAUTION! The stop switch automatically returns to the start position. In order to prevent unintentional starting, the spark plug cap must be removed
from the spark plug when assembling, checking and/or performing maintenance.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be worn.
Filling with chain oil and adjusting oil flow
2 – English