Husqvarna 4000 manuel dutilisation Introduction, Personal Safety Equipment

INTRODUCTION

The 4000 is designed as a heavy duty commercial, industrial, and paving Ultra Early Entry con- crete saw. The patented Soff-Cut Ultra Early Entry dry cutting system controls random cracking of concrete through the early timing of the saw cutting usually within one to two hours after finishing process is com- pleted. The patented low noise and low dust blade block and skid plate technology in conjunction with the Husqvarna blades allows for Ultra Early Entry sawing the same day while minimizing chipping and spalling. The saw is a self-propelled style with manual controls for most functions. It is an electric start saw with power blade depth control.

Common sense:

The focus of this manual is HOW to operate and service the equipment safely.

It is not possible to cover every conceivable situation you can face when using this equipment. Therefore use this product only in a manner described in this manual. Operation or handling the machine in any other manner can lead to serious injury or death.

If a situation is not described in this manual it should be considered dangerous - and not be done.

If you are unfamiliar with this product make sure that you carefully understand how it functions and practice all operations and handling before putting the machine to use. Familiarize yourself in the presence of an experienced operator. Avoid all situations that are beyond your capability.

If you still feel uncertain about the operating procedures after reading these instructions DO NOT operate the machine until you have consulted an experienced operator.

If you have further questions you can contact the closest Husqvarna Construction Products location by writing or calling, see information below. You can also find the closest location by searching the internet at; www.husqvarnacp.com . Husqvarna Construction Products will willingly be of service and provide you with advice as well as help you to use your product both efficiently and safely.

Additional manuals are available at NO CHARGE and can also be obtained on the internet site.

	Toll Free no:	800 776 3328 (USA & Canada)
Husqvarna Construction Products	Phone no:	951 272 2330
265 Radio Road	Telefax no:	951 272 2338
Corona, California 92879	Internet Site: www.husqvarnacp.com
USA

PERSONAL SAFETY EQUIPMENT

When working and operating the saw the following approved personal safety items should be used:

Head	Hearing	Eye	Safety	Protective
Protection	Protection	Protection	Shoes	Gloves

3