Husqvarna 4000 manuel dutilisation Register the Product, Safety Definitions, Safety Hazards

Page 4

REGISTER THE PRODUCT

Please register your new 4000 with Husqvarna Construction Products by mailing

in the registration card that came with the machine or you can register on the internet site

www.husqvarnawarranty.com

Registration will allow us to contact in case of any critical updates or recalls on this machine. Warranty registration has also been found to be helpful in tracing stolen equipment.

Record the following information for your records:

PURCHASE DATE: ________________

 

MODEL No: ________________

SERIAL No: __________________

ENGINE MODEL: _____________ ENGINE TYPE: ______________ ENGINE CODE: ________________

The 4000 model and serial number as well as the engine model number, engine type and code are critical in order to obtain the correct service parts.

SAFETY DEFINITIONS

In this manual a Safety Alert Symbol followed by the signal words WARNING and CAUTION are used to identify safety information about hazards which can result in death, serious injury and/or property damage.

These signal words mean:

WARNING indicates a hazard which, if not avoided, could result in death or serious injury. CAUTION indicates a hazard which, if not avoided, might result in minor or moderate injury.

NOTICE indicates a message not related to personal injury.

SAFETY HAZARDS

WARNING

DO NOT MODIFY THE PRODUCT

Under no circumstances may the design of the machine be modified without the permission of the manu- facturer. Always use genuine accessories. Unauthorized modifications and/or accessories can result in serious personal injury or the death of the operator or others. Your warranty may not cover damage or liability caused by the use of unauthorized accessories or replacement parts.

WARNING

WARNING

CAUTION

ASPHYXIATION HAZARD

CALIFORNIA PROP 65

HEARING HAZARD

Running an engine in a con-

Use of this product can expose

During the normal use of this

fined or badly ventilated area

you to materials known to the

machine, operator may be

can result in injury or death due

State of California to cause

exposed to a noise level equal

to asphyxiation or carbon

cancer and/or birth defects or

to or higher than 85 dB(A). Use

monoxide poisoning.

other reproductive harm.

hearing protection.

 

 

 

4

Image 4
Contents 4000 Unpacking Transporting ContentsSound Data Personal Safety Equipment IntroductionSafety Hazards Safety DefinitionsRegister the Product Safety Warnings Personal SafetyExcel Series Blades Blade and Skid Plate InstallationStep What is What Model number and serial NumberOperating Instructions Do not operate saw if there is a fuel leakFuel Handling Proper FuelOIL Handling Engine OILEngine and Transmission Maintenance Air filterAdditional Engine Information Transmission oilOther Maintenance Maintenance ScheduleRecommended Contraction Joint Spacing Sawing Contraction JointsConcrete thickness, in. mm Maximum spacing, ft. m Maximizing the SOFF-CUT System Troubleshooting SAW is Spalling and Ravelling CUTEngine Runs ROUGH, Back Fires or can not Reach Full Speed Engine will not StartTechnical Specifications Conformity CertificatesWarranty HusqvarnA Equipment Warranty505 41