Safety Instructions, Machine′s safety equipment

SAFETY INSTRUCTIONS

Steps before using a new power cutter.

•This machine is a hydraulically operated power cutter intended for free-hand cutting. The machine should be connected to a hydraulic unit with an oil ﬂow of 35-42 litres/min and a maximum pressure of 150 bar.

•Please read the operator’s manual carefully.

•Check the cutting blade’s mounting, see the chapter ”Assembly”.

Let your Husqvarna dealer check the power cutter and make essential adjustments and repairs.

WARNING! Under no circumstances may the

!design of the machine be modiﬁed without the permission of the manufacturer. Always use genuine accessories. Non-authorized modiﬁcations and/or accessories can result in serious personal injury or the death of the operator or others.

WARNING! Use of products which cut, grind,

!drill, sand or shape material can generate dust and vapors which may contain harmful chemicals. Know the nature of the material being worked on and wear appropriate dust mask or respirator protection.

WARNING! A power cutter is a dangerous

!tool if used carelessly or incorrectly and can cause serious, even fatal injuries. It is extremely important that you read and understand the contents of this Operator’s Manual.

Husqvarna Construction Products has a policy of continuous product development. Husqvarna reserves the right to modify the design and appearance of products without prior notice and without further obligation introduce design modiﬁcations.

All information and all data in the Operator’s Manual were applicable at the time the Operator’s Manual was sent to print.

Personal protective equipment

WARNING! You must use approved personal

!protective equipment whenever you use the machine. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your dealer for help in choosing the right equipment.

•Protective helmet

•Hearing protection

•Protective goggles or a visor

•Breathing mask

•Heavy-duty, ﬁrm grip gloves.

•Tight-ﬁtting, heavy-duty and comfortable clothing that permits full freedom of movement.

•Use leg-guards recommended for the material to be cut.

•Boots with steel toe-caps and non-slip sole

•Always have a ﬁrst aid kit nearby.

Machine′s safety equipment

This section describes the machine′s safety equipment, its purpose, and how checks and maintenance should be carried out to ensure that it operates correctly. See the ”What is what?” section to locate where this equipment is positioned on your machine.

WARNING! Never use a machine that has

!faulty safety equipment! Carry out the inspection, maintenance and service routines listed in this section.

Switch

The switch is used to start and stop the machine.

English – 5