Husqvarna k2500 Technical Data, Technical data, Cutting equipment, EC-declaration of conformity

		TECHNICAL DATA
Technical data
Technical data			K2500
Engine
Hydraulic oil flow, l/min / gpm		35-42 / 9-11
Working pressure, bar / psi		130-140 / 2000
Max. working pressure, bar / psi		150 / 2200
Max. speed of output shaft, rpm		4300
Drive system, V-belt			SPZ
Weight
Power cutter without cutting blade, kg		8,3
Sound levels
Noise pressure level at the operators ear,		max. speed,
measured according to ISO/DIS 15744, ISO/DIS 11201,
dB (A)		85
Noise emissions
Sound power level, measured dB(A)		106
Sound power level, guaranteed LWA dB(A)		107
Vibration levels
(see note 1)
Front handle, m/s2		7,5
Rear handle, m/s2		5,2
Note 1: Handle vibrations are measured according to ISO 8662-4
Cutting equipment
Cutting blade	Max. peripheral speed, m/s
16"	100

EC-declaration of conformity

(Applies to Europe only)

Husqvarna Construction Products, SE-433 81 Partille, Sweden, tel: +46-31-949000, declares under sole responsibility that the power cutter K2500 from year 2006 serial numbers and onward (the year is clearly stated in plain text on the rating plate with subsequent serial number) conforms with the requirements of the COUNCIL’S DIRECTIVE:

- of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.

The following standards have been applied: EN ISO 12100:2003, EN 982:1996, EN 792-7:2001

SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has performed voluntary type examination on behalf of Husqvarna AB. The certificates are numbered: 01/169/009 – K2500.

Partille November 14, 2006

Ove Donnerdal, Development Manager

English – 15