Husqvarna k2500 manual KEY to Symbols, Key to symbols

Page 2

KEY TO SYMBOLS

WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

• Approved protective helmet

• Approved hearing protection

• Protective goggles or a visor

•Breathing mask

This product is in accordance with applicable EC directives.

Other symbols/decals on the machine refer to special certiﬁcation requirements for certain markets.

Always disconnect the machine from the hydraulic hoses before inspection and/or maintenance of the machine.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be worn.

2 – English

Image 2

Contents K2500 KEY to Symbols Key to symbolsContents What is WHAT? What is what on the power cutter?Machine′s safety equipment Safety InstructionsSteps before using a new power cutter SwitchGeneral safety precautions Transport and storage Basic safety rulesGeneral working instructions CuttingSharpening diamond blades How to avoid kickbackWhat is kickback? Blade vibrationAbrasive discs Cutting bladesGeneral Diamond blades for dry cutting Diamond bladesDiamond blades for wet cutting MaterialFitting the cutting blade AssemblyAssembly Guard for the bladeStarting Starting and StoppingStarting and stopping StoppingMaintenance MaintenanceDaily maintenance ´z+R=@¶6r¨ 14 English´z+R=@¶6r¨Cutting equipment Technical DataTechnical data EC-declaration of conformity1150293-26 ´z+R=@¶6r¨ ´z+R=@¶6r¨