Hobart Welding Products 2250 specifications Changing Input Voltage From 230 Volts To 200 Volts

2-9. Changing Input Voltage From 230 Volts To 200 Volts

		Cut cable ties as necessary.
		1	230 Volt Transformer
			Lead/Fan Lead
	2	2	Black Switch Lead
		3	Tubing
		Locate lead marked 230 VAC.
		Slide tubing down and disconnect
		black switch lead from splice. Be
		sure 230 volt transformer lead and
	3	white fan lead remain spliced.
		Fold tubing over 230 volt transform-
		er/fan lead splice and secure.
4		4	200 Volt Lead
200 VAC	1	Locate lead marked 200 VAC.

	Slide tubing down, and connect 200
230 VAC	volt lead stub to black switch lead
	that was just disconnected from the
	230 volt lead, and secure with exist-
	ing hardware.
	Slide tubing over connection and
	secure.

Tools Needed:

5/16, 3/8 in

Ref. ST-802 287

2-10. Electrical Service Guide

Input Voltage	200	230
Input Amperes At Rated Output	40	35
Max Recommended Standard Fuse Or Circuit Breaker Rating In Amperes	60	50
Min Input Conductor Size In AWG/Kcmil	8	10
Max Recommended Input Conductor Length In Feet (Meters)	108 (33)	94 (29)
Min Grounding Conductor Size In AWG/Kcmil	10	10
Reference: 1996 National Electrical Code (NEC)		S-0092J

OM-192 440 Page 13