PhilipsT8 32W Extra Long Life Lamps featuring ALTO II™ Technology
Ordering, Electrical andTechnical Data
|
|
|
|
| Color | Nom. | Rated Average Life (hrs)1 | Approx. |
|
|
| |
| Product | Ordering |
| Pack. | Temp. | Length | Initial | Design |
| Lumen | ||
| Number | Code | Watts | Qty. | (Kelvin) | (In.) | Ins. Start | Prog. Start | Lumens2 | Lumens3 | CRI | Maint. |
E | F32T8/TL830/XLL/ALTO | 32 | 25 | 3000 | 48 | 40,000 | 46,000 | 2950 | 2800 | 85 | 95% | |
E | F32T8/TL835/XLL/ALTO | 32 | 25 | 3500 | 48 | 40,000 | 46,000 | 2950 | 2800 | 85 | 95% | |
E | F32T8/TL841/XLL/ALTO | 32 | 25 | 4100 | 48 | 40,000 | 46,000 | 2950 | 2800 | 85 | 95% | |
E | F32T8/TL850/XLL/ALTO | 32 | 25 | 5000 | 48 | 40,000 | 46,000 | 2850 | 2700 | 85 | 95% | |
1) Average life under engineering data with lamps turned off and restarted once every 12 operating hours.
2) Approximate initial lumens.The lamp lumen output is based upon lamp performance after 100 hours of operating life, when the output is measured during operation on a reference ballast under standard laboratory conditions.For expected lamp lumen output, commercial ballast manufacturers can advise the appropriate ballast factor for each of their ballasts when they are informed of the designated lamp.The ballast factor is a multiplier applied to the designated lamp lumen output.
3) Design lumens are the approximate lamp lumen output at 40% of the lamp’s rated average life.This output is based upon measurements obtained during lamp operation on a reference ballast under standard laboratory conditions.
E Lamp meets US Federal Minimum Efficiency Standards.
This lamp is better for the environment because of its reduced mercury content. All Philips ALTOII™ lamps give you
95% Lumen Maintenance
Philips T8 32W XLL Lamps
100%
| 98% |
(%) |
|
Output | 96% |
| |
Light | 94% |
| 92% |
| 90% |
0 | 5,000 | 10,000 | 15,000 | 20,000 | 25,000 | 30,000 | 35,000 | 40,000 | 45,000 | 50,000 |
Lamp Operating Hours
Rated Average Life
Philips T8 32W XLL Lamps
Instant Start Ballast | Programmed Start Ballast |
BASED ON 3 HOURS PER START4
36,000
40,000
BASED ON 12 HOURS PER START1
40,000
46,000
0 | 10,000 | 20,000 | 30,000 | 40,000 | 50,000 |
Rated Average Life in Hours
4)Average life under specified test conditions with lamps turned off and restarted no more frequently than once every 3 operating hours. Lamp life is appreciably longer if lamps are started less frequently.
Footnotes from front page:
* When compared to an industry standard 4' T8 32W lamp with 24,000 hours rated average life (12 hours per start on an instant start ballast), with 2800 lumens and 75 CRI.
Specifications are subject to change without notice. © 2007 Philips Lighting Company. All rights reserved. Printed in USA 06/07
www. philips.com
Philips Lighting Company | Philips Lighting |
200 Franklin Square Drive | 281 Hillmount Road |
P.O. Box 6800 | Markham, Ontario |
Somerset, NJ | Canada L6C 2S3 |
A Division of Philips Electronics North America Corporation | A Division of Philips Electronics Ltd. |
Printed on chlorine free paper from Sappi Fine Paper mills, who are accredited with EMAS environmental certification. Sappi claims that the pulp used in the manufacture of Magno Dull paper is derived from environmentally certified forests.