Installing Guards
Protective Cover (235) Chuck Guard (201)
Figure 7
Figure 8
Washer (239), Spring (237), and Nut (240). Then, thread the Screw (238) into the Compound Rest (108). Slide the notch in the Protective Cover (235) over the end of the Slotted Screw (236).
1.To install the Chuck Guard (201), remove the two Screws (73) on the Hinge (202). Attach the Chuck Guard (201) to the Hinge using the Screws. The Chuck Guard should be aligned so that it covers the Chuck (2) when swung down over it.
Figure 9
2.To install the Protective Cover (235), remove the Screw (238) from the Compound Rest (108). Slide the Screw
(238) through the Protective Cover (235),
REV 10b |
|
|
SKU 93212 | For technical questions, please call | Page 13 |