Harbor Freight Tools 93212 To Stop the Lathe, Mechanism Chuck Guard 201 has a safety

Chuck Guard

(201)

Properly in place

Safety

Mechanism

Pin (251) properly extended

into the recess, allowing

the lathe to operate.

Rotating

Plate

(252)

Safety

Figure 25 Mechanism

5.The Chuck Guard (201) has a safety

interlock and the Lathe will not operate unless the guard is properly in place. Install the guard if not already done so. Check to ensure that the Guard

(201)is in its operating position over the Chuck (2). The Pin (251) must be correctly seated in the recess in the Rotating Plate (252) for the Lathe to work.

6.Plug in the Lathe.

Forward-OFF-Reverse Switch (181)

Power Switch (178)

Figure 26 Speed Control Knob (180)

7.Move the Power Switch (178) to the “On” position (switch will turn Red) and place the Forward-Off-Reverse Switch (181) in the direction needed.

8.Move the Variable Speed Control Knob (180) to the needed operating speed to

start the Lathe.

REV 10b

To Stop the Lathe

1.Turn the Speed Control Knob (180) to 0.

2.Move the Forward-OFF-Reverse Switch to OFF.

3.Turn the Power Switch (178) OFF.

4.Unplug the Lathe when not in use.

SKU 93212 For technical questions, please call 1-800-444-3353. Page 21