SECTION 4: ASSEMBLY
Beginning Assembly
!Disconnect power to the machine when perform-
ing any maintenance, assembly or adjust- ments. Failure to do this may result in serious personal injury.
Keep loose clothing rolled up and out of the way of machinery and keep hair pulled back.
Wear safety glasses dur- ing the entire assembly process. Failure to com- ply may result in serious personal injury.
Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.
Most of your Model G5979 has been assembled at the factory, but some parts must be assembled or installed after delivery. We have organized the assembly process into steps. Please follow along in the order presented here.
TOOLS REQUIRED: Metric hex key set, adjustable wrench, Phillips and flat screwdriver.
Stand
1.Attach a front and rear vertical leg to the top plate using the
2.Repeat the previous step with the other two vertical legs.
3.Attach the two long horizontal supports to each of the vertical leg assemblies using the
4.Attach the two short horizontal supports to each of the vertical leg assemblies using the
5.Place the stand on a level surface and tight- en all the nuts using a 14mm wrench.
Figure 4. Stand assembled.
G5979 Wood Lathe |