Grizzly G5979 instruction manual Length AMP Rating

Page 5

Safety Instructions For Power Tools

9.USE PROPER EXTENSION CORD. Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Your extension cord must also contain a ground wire and plug pin. Always repair or replace exten- sion cords if they become damaged.

Minimum Gauge for Extension Cords

 

 

LENGTH

 

AMP RATING

25ft

 

50ft

 

100ft

0-6

18

 

16

 

16

7-10

18

 

16

 

14

11-12

16

 

16

 

14

13-16

14

 

12

 

12

17-20

12

 

12

 

10

21-30

10

 

10

 

No

 

 

 

 

 

 

10.WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Non-slip footwear is recommended. Wear protective hair cov- ering to contain long hair.

11.ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses.

12.SECURE WORK. Use clamps or a vise to hold work when practical. It’s safer than using your hand and frees both hands to operate tool.

13.DO NOT OVER-REACH.Keep proper footing and balance at all times.

14.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubri- cating and changing accessories.

15.USE RECOMMENDED ACCESSORIES. Consult the owner’s manual for recom- mended accessories. The use of improper accessories may cause risk of injury.

16.REDUCE THE RISK OF UNINTENTION- AL STARTING. On machines with magnet- ic contact starting switches there is a risk of starting if the machine is bumped or jarred. Always disconnect from power source before adjusting or servicing. Make sure switch is in OFF position before reconnecting.

17.MANY WOODWORKING TOOLS CAN “KICKBACK” THE WORKPIECE toward the operator if not handled properly. Know what conditions can create “kickback” and know how to avoid them. Read the manual accom- panying the machine thoroughly.

18.CHECK DAMAGED PARTS. Before fur- ther use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, bind- ing of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

19.NEVER LEAVE TOOL RUNNING UNAT- TENDED. TURN POWER OFF. Do not leave tool until it comes to a complete stop.

20.NEVER OPERATE A MACHINE WHEN TIRED, OR UNDER THE INFLUENCE OF DRUGS OR ALCOHOL. Full mental alert- ness is required at all times when running a machine.

21.NEVER ALLOW UNSUPERVISED OR UNTRAINED PERSONNEL TO OPER- ATE THE MACHINE. Make sure any instructions you give in regards to machine operation are approved, correct, safe, and clearly understood.

22.IF AT ANY TIME YOU ARE EXPERIENC- ING DIFFICULTIES performing the intend- ed operation, stop using the machine! Then contact our service department or ask a qualified expert how the operation should be performed.

G5979 Wood Lathe

-3-

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 12 X 351⁄2 Wood Lathe Page Table Of Contents Safety Instructions For Power Tools SafetyLength AMP Rating Additional Safety Instructions For The Lathe 110V Operation Circuit RequirementsExtension Cords GroundingCommentary IntroductionUnpacking Parts layout Piece InventoryBolt Hardware Recognition ChartSite Considerations Clean UpStand AssemblyBeginning Assembly Wooden Floor Lathe To Stand Floor MountingSpur Center Headstock LockAttaching extension table G5979 Wood Lathe Faceplate Extension BedTailstock AdjustmentsHeadstock Tool Rest Tailstock assemblySpeed Selector OperationsTest Run Spindle Turning Faceplate turning large projects Faceplate TurningMaintenance Closure Machine Data Sheet Page 54-3 54-1 54-6 54-5 54-4 Headstock Warranty and Returns Warranty Card Grizzly INDUSTRIAL, INC

G5979 specifications

The Grizzly G5979 is a versatile and robust woodworking lathe designed for both professional and amateur woodworkers. Known for its durability and precision, the G5979 model stands out in the woodworking community for its innovative features and user-friendly design.

One of the main characteristics of the Grizzly G5979 is its powerful 1 HP motor, providing ample torque for turning a wide variety of wood pieces. The variable speed range, adjustable from 600 to 3200 RPM, gives users the flexibility to select the optimal speed for their specific project, whether it’s shaping delicate spindles or roughing out larger bowls.

The lathe boasts a solid cast iron construction, which not only contributes to stability during operation but also helps minimize vibrations. This ensures a smooth finish on the woodwork and allows for greater accuracy in shaping the material. Additionally, the bed of the lathe is designed to accommodate longer workpieces, making it suitable for projects of varying sizes.

Another key feature of the Grizzly G5979 is its swiveling headstock, which can be rotated 180 degrees. This functionality enhances the versatility of the lathe, enabling users to easily access different angles for intricate designs and detailed work. Enhancing this feature is an easy-to-read scale for adjustments, making it effortless for woodworkers to make precise changes.

The lathe also includes a built-in tailstock with a precision live center, allowing for secure and accurate positioning of workpieces. An easy to operate handwheel enables fine adjustments, adding to the overall convenience of the device.

The G5979 is equipped with a sturdy tool rest that can be adjusted for height and angle, facilitating smoother transitions during turning. The tool rest is designed for easy installation and removal, enhancing the lathe's operation efficiency.

Safety features of the Grizzly G5979 include a safety switch and an emergency stop button, ensuring that users can quickly halt operation in case of any unforeseen issues. Moreover, the overall design reflects a commitment to user safety and ease of use, making it an appealing choice for woodworkers at any skill level.

In summary, the Grizzly G5979 woodworking lathe represents a great blend of power, precision, and safety. Its array of features and technologies ensures that users can tackle a wide range of woodworking projects effectively. Whether you are an experienced craftsman or a beginner, the G5979 is a solid investment for any woodworking shop.
Top Page Image Contents