Barrel Lock Handle
Tailstock Lock Handle
Figure 13. Tailstock assembly.
Figure 14. Removing live center.
Tool Rest
The tool rest can be used with or without the extension arm. To adjust the tool rest:
1.To adjust the main base along the bed, loosen the lock lever and slide into the desired position. Retighten the lock lever.
2.When using the extension arm, make the necessary adjustments using the lock levers and adjusting the extension arm.
3.Make sure there is adequate clearance between the workpiece and the tool rest. Test by
Tool Rest Lock Handles
Figure 15. Tool rest assembly.
G5979 Wood Lathe |