Grizzly G5979 instruction manual Adjustments, Headstock, Tailstock

Page 17

SECTION 5: ADJUSTMENTS

!Disconnect power to the machine when perform- ing any maintenance,

assembly or adjust- ments. Failure to do this may result in serious personal injury.

Keep loose clothing rolled up and out of the way of machinery and keep hair pulled back.

Wear safety glasses during the entire adjust- ment process. Failure to comply may result in serious personal injury.

Headstock

The headstock has 5 preset positions: 0° for gen- eral spindle turning; 60°, 90° and 120° when doing faceplate turnings where the workpiece extends below the level of the lathe/extension bed; and 180° when doing faceplate turning where the workpiece edge does not extend below the edge of the lathe/extension bed. To set the headstock to the desired degree:

1.Loosen the lock handle by turning counter- clockwise one full revolution.

2.Pull out on the headstock release knob and rotate the headstock clockwise to the desired setting. The headstock will be fixed into posi- tion when it clicks into one of the 5 preset positions.

3.Tighten the lock handle that was loosened in the first step. Do not attempt to lock the headstock into a position other than the 5 presets.

G5979 Wood Lathe

Figure 12. Adjusting headstock.

Tailstock

The tailstock can be moved along the length of the lathe bed. The tailstock barrel holds the live center, which can be adjusted up to 212" from the tailstock housing. To adjust the tailstock and tail- stock spindle:

1.Loosen the tailstock lock handle by lowering it and slide the tailstock to the desired posi- tion along the lathe bed. Retighten the tail- stock lock handle by lifting it. The lock handle mechanism can be adjusted by tightening or loosening the large hex nut under the tail- stock.

2.To adjust the tailstock barrel, loosen the spin- dle lock handle.

3.Rotate the tailstock spindle handwheel until the desired position is achieved. Retighten the tailstock spindle lock handle.

4.To remove the live center from the tailstock spindle, use the push-out rod inserted through the hollow center of the tailstock spindle.

-15-

Image 17
Contents 12 X 351⁄2 Wood Lathe Page Table Of Contents Safety Instructions For Power Tools SafetyLength AMP Rating Additional Safety Instructions For The Lathe 110V Operation Circuit RequirementsExtension Cords GroundingCommentary IntroductionUnpacking Parts layout Piece InventoryBolt Hardware Recognition ChartSite Considerations Clean UpStand AssemblyBeginning Assembly Wooden Floor Lathe To Stand Floor MountingSpur Center Headstock LockAttaching extension table G5979 Wood Lathe Faceplate Extension BedTailstock AdjustmentsHeadstock Tool Rest Tailstock assemblySpeed Selector OperationsTest Run Spindle Turning Faceplate turning large projects Faceplate TurningMaintenance Closure Machine Data Sheet Page 54-3 54-1 54-6 54-5 54-4 Headstock Warranty and Returns Warranty Card Grizzly INDUSTRIAL, INC

G5979 specifications

The Grizzly G5979 is a versatile and robust woodworking lathe designed for both professional and amateur woodworkers. Known for its durability and precision, the G5979 model stands out in the woodworking community for its innovative features and user-friendly design.

One of the main characteristics of the Grizzly G5979 is its powerful 1 HP motor, providing ample torque for turning a wide variety of wood pieces. The variable speed range, adjustable from 600 to 3200 RPM, gives users the flexibility to select the optimal speed for their specific project, whether it’s shaping delicate spindles or roughing out larger bowls.

The lathe boasts a solid cast iron construction, which not only contributes to stability during operation but also helps minimize vibrations. This ensures a smooth finish on the woodwork and allows for greater accuracy in shaping the material. Additionally, the bed of the lathe is designed to accommodate longer workpieces, making it suitable for projects of varying sizes.

Another key feature of the Grizzly G5979 is its swiveling headstock, which can be rotated 180 degrees. This functionality enhances the versatility of the lathe, enabling users to easily access different angles for intricate designs and detailed work. Enhancing this feature is an easy-to-read scale for adjustments, making it effortless for woodworkers to make precise changes.

The lathe also includes a built-in tailstock with a precision live center, allowing for secure and accurate positioning of workpieces. An easy to operate handwheel enables fine adjustments, adding to the overall convenience of the device.

The G5979 is equipped with a sturdy tool rest that can be adjusted for height and angle, facilitating smoother transitions during turning. The tool rest is designed for easy installation and removal, enhancing the lathe's operation efficiency.

Safety features of the Grizzly G5979 include a safety switch and an emergency stop button, ensuring that users can quickly halt operation in case of any unforeseen issues. Moreover, the overall design reflects a commitment to user safety and ease of use, making it an appealing choice for woodworkers at any skill level.

In summary, the Grizzly G5979 woodworking lathe represents a great blend of power, precision, and safety. Its array of features and technologies ensures that users can tackle a wide range of woodworking projects effectively. Whether you are an experienced craftsman or a beginner, the G5979 is a solid investment for any woodworking shop.