Contents of the Shipping Container

1. Head Assembly

1. Table

1. Column and Bracket Assembly

1. Base

1. Owner’s Manual

1. Warranty Registration Card

1. Chuck and Chuck Key

3. Downfeed Handle

1. Table Bracket Lock Handle

1. Table Bracket Raising Handle

4. M10 x 40 Hex Cap Bolts

1. Arbor

1. Drift Key

Tools Supplied for Assembly

1. 3mm Hex Wrench

1. 5mm Hex Wrench

Tools Required for Assembly

1.17mm Box Wrench or a 6”-8” Adjustable Wrench

WARNING!

Read and understand all assembly

instructions before attempting assembly! Failure to comply may cause serious injury!

Before Assembly

1.Remove the contents from the shipping container.

2.Compare the contents of the shipping container with the list found above. Report any shortages or damage to your JET distributor.

3.Clean all rust protected surfaces with kerosene or a light solvent. Do not use lacquer thinner, paint thinner, or gasoline. These will damage plastic components and painted surfaces.