Jet Tools JDP-20MF guide

1.Read and understand the entire owners manual before attempting assembly or operation.

2.Read and understand the warnings posted on the machine and in this manual. Failure to comply with all of these warnings may cause serious injury.

3.Replace the warning labels if they become obscured or removed.

4.This drill press is designed and intended for use by properly trained and experienced personnel only. If you are not familiar with the proper and safe operation of a drill press, do not use until proper training and knowledge have been obtained.

5.Do not use this drill press for other than its intended use. If used for other purposes, WMH Tool Group disclaims any real or implied warranty and holds itself harmless from any injury that may result from that use.

6.Always wear approved safety glasses/face shields while using this drill press. Everyday eyeglasses only have impact resistant lenses; they are not safety glasses.

7.Before operating this drill press, remove tie, rings, watches and other jewelry, and roll sleeves up past the elbows. Remove all loose clothing and confine long hair. Non-slip footwear or anti-skid floor strips are recommended. Do not wear gloves.

8.Wear ear protectors (plugs or muffs) during extended periods of operation.

9.Some dust created by power sanding, sawing, grinding, drilling and other construction activities contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•Lead from lead based paint.

•Crystalline silica from bricks, cement and other masonry products.

•Arsenic and chromium from chemically treated lumber.

10.Your risk of exposure varies, depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment, such as face or dust masks that are specifically designed to filter out microscopic particles.

11.Do not operate this machine while tired or under the influence of drugs, alcohol or any medication.

12.Make certain the switch is in the OFF position before connecting the machine to the power supply.

13.Make certain the machine is properly grounded.

14.Make all machine adjustments or maintenance with the machine unplugged from the power source.

15.Remove adjusting keys and wrenches. Form a habit of checking to see that keys and adjusting wrenches are removed from the machine before turning it on.

16.Keep safety guards in place at all times when the machine is in use. If removed for maintenance purposes, use extreme caution and replace the guards immediately.

17.Make sure the drill press is firmly secured to the floor or bench before use.

18.Check damaged parts. Before further use of the machine, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

19.Provide for adequate space surrounding work area and non-glare, overhead lighting.

20.Keep the floor around the machine clean and free of scrap material, oil and grease.

JDP-20MF specifications

The Jet Tools JDP-20MF is a powerful and versatile drill press designed to meet the needs of both professional woodworkers and DIY enthusiasts. Known for its impressive features, robust build, and advanced technology, this drill press provides users with precision and reliability for various woodworking tasks.

One of the standout features of the JDP-20MF is its heavy-duty 1 HP motor. This powerful motor ensures consistent performance, capable of handling a wide range of materials from softwoods to hardwoods with ease. With a variable speed control that ranges from 140 to 3000 RPM, users can easily adjust the speed according to the material and drilling requirements, ensuring optimal results for each application.

The JDP-20MF comes equipped with a 20-inch swing, which allows users to drill holes in larger workpieces without the need for repositioning. Its substantial table measures 12-1/2 inches by 24 inches, providing ample support and stability for large pieces. The table is also adjustable, tilting up to 30 degrees left and right, catering to a variety of drilling angles and tasks.

Another notable technology integrated into the JDP-20MF is the laser guide system. This feature projects a laser beam onto the workpiece, ensuring precise alignment and accurate drilling. This not only increases efficiency but also reduces the likelihood of costly mistakes, making it an invaluable tool for meticulous woodworkers.

Safety is paramount in the design of the JDP-20MF, as evidenced by its built-in safety key, which prevents accidental start-ups, and its sturdy metal housing that minimizes vibrations during operation. The drill press also features a work light to illuminate the drilling area, enhancing visibility and precision.

In summary, the Jet Tools JDP-20MF is a robust and feature-rich drill press that excels in both performance and versatility. With its powerful motor, variable speed settings, generous swing and table size, laser guide system, and focus on safety, it is an excellent choice for anyone looking to elevate their woodworking projects. Whether for a professional workshop or a home garage, the JDP-20MF stands out as a reliable and efficient drilling solution.