Crank Handle, Column Lock Handle | Jet Tools JDP-20MF guide

Crank Handle

Referring to Figure 4:

1.Loosen the setscrew (B) on the table crank handle (A).

2.Slide the handle (A) onto the table bracket shaft.

3.Turn the handle until the setscrew is opposite the flat section on the shaft, and tighten the setscrew to secure the handle.

Column Lock Handle

Referring to Figure 5:

Thread the column lock handle (A) into the table bracket (B).

Table Installation

The table is heavy! This installation is a two person operation to avoid injury from accidental dropping.

Referring to Figure 6:

1.Have one person hold the table (A) against the bracket (B), aligning the hole in the mounting plate of the table with the threaded hole in bracket.

2.Have the second person insert the 5/8"-11x2 hex head screw (C) through the opening on the bottom side of the table (A) and start threading the screw into the bracket by hand.

3.Finish tightening the screw (C) with a 15/16" or wrench (wrench provided), but leave loose enough so the table can be tilted by hand.

4.Using the scale on the bracket as a guide, set the table angle to 0 degrees (level).

5.Take the locator pin (D) and adjust the hex nut towards the end of the thread as shown in the close up view (D).

6.Insert the non-threaded end of the locator pin

(D)into the hole on the table found just below the mounting screw. Press all the way in.

Note: The table may have to be tilted slightly back and forth if the holes do not quite align.

7. Tighten the screw (C) with a 15/16" wrench.

Figure 4

Figure 5

Figure 6

JDP-20MF specifications

The Jet Tools JDP-20MF is a powerful and versatile drill press designed to meet the needs of both professional woodworkers and DIY enthusiasts. Known for its impressive features, robust build, and advanced technology, this drill press provides users with precision and reliability for various woodworking tasks.

One of the standout features of the JDP-20MF is its heavy-duty 1 HP motor. This powerful motor ensures consistent performance, capable of handling a wide range of materials from softwoods to hardwoods with ease. With a variable speed control that ranges from 140 to 3000 RPM, users can easily adjust the speed according to the material and drilling requirements, ensuring optimal results for each application.

The JDP-20MF comes equipped with a 20-inch swing, which allows users to drill holes in larger workpieces without the need for repositioning. Its substantial table measures 12-1/2 inches by 24 inches, providing ample support and stability for large pieces. The table is also adjustable, tilting up to 30 degrees left and right, catering to a variety of drilling angles and tasks.

Another notable technology integrated into the JDP-20MF is the laser guide system. This feature projects a laser beam onto the workpiece, ensuring precise alignment and accurate drilling. This not only increases efficiency but also reduces the likelihood of costly mistakes, making it an invaluable tool for meticulous woodworkers.

Safety is paramount in the design of the JDP-20MF, as evidenced by its built-in safety key, which prevents accidental start-ups, and its sturdy metal housing that minimizes vibrations during operation. The drill press also features a work light to illuminate the drilling area, enhancing visibility and precision.

In summary, the Jet Tools JDP-20MF is a robust and feature-rich drill press that excels in both performance and versatility. With its powerful motor, variable speed settings, generous swing and table size, laser guide system, and focus on safety, it is an excellent choice for anyone looking to elevate their woodworking projects. Whether for a professional workshop or a home garage, the JDP-20MF stands out as a reliable and efficient drilling solution.