Jet Tools JDP-20MF operating instructions Before Assembly, Column Assembly, Table Bracket

Page 8

Assembly

Read and understand all assembly instructions before attempting assembly! Failure to comply may cause serious injury!

Do not attempt to turn on power before this machine is completely assembled.

Before Assembly

1.Remove the contents from the shipping container.

2.Compare the contents of the shipping container with the list on page 7. Report any shortages or damage to your JET distributor.

3.Clean all rust protected surfaces with kerosene or a light solvent. Do not use lacquer thinner, paint thinner, or gasoline. These will damage plastic components and painted surfaces.

Column Assembly

Referring to Figure 1:

1.Place the base (A) on a level floor.

2.Place the column assembly (B) on the base

(A) and align the holes in the column support with the holes in the base.

3.Using a 17mm wrench, secure the column (B) with four M10 x 40 hex cap screws (C) to the base.

Table Bracket

When shipped, the rack ring and rack are bundled together with the column in plastic wrap.

Referring to Figures 2 and 3:

1.Remove the wrap and take the rack ring (D) and rack (B) off the column (C).

2.Install the table bracket (A) together with the rack (B) on the column (C) as shown in Figure 2.

3.Slide the rack ring (D) over the column (C), placing it so it rests against the rack (B) as shown in Figure 3 and tighten firmly with a 3mm hex wrench (provided).

Figure 1

Figure 2

Figure 3

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Drill Press Part No. M-354170Warranty More Information WMH Tool Group WarrantyTable of Contents Page Page Specifications JDP-20MFShipping Contents Required ToolsAssembly Before AssemblyColumn Assembly Table BracketColumn Lock Handle Table InstallationCrank Handle Head Assembly Chuck and Arbor InstallationAdjustment Depth Stop AdjustmentChuck and Arbor Removal Changing Spindle SpeedsWork Light Return Spring AdjustmentTable Tilt Adjustment Maintenance OperationLubrication ElectricalGrounding Instructions Extension CordsProbable Cause Remedy TroubleshootingTrouble Trouble Probable Cause Remedy Replacement PartsParts Exploded View Drawing JDP-20MF Parts List JDP-20MF Index No. Part No Description Size Qty21015M3J40 28065558B3 Wiring Diagram JDP-20MF Electrical SchematicPage Page WMH Tool Group

JDP-20MF specifications

The Jet Tools JDP-20MF is a powerful and versatile drill press designed to meet the needs of both professional woodworkers and DIY enthusiasts. Known for its impressive features, robust build, and advanced technology, this drill press provides users with precision and reliability for various woodworking tasks.

One of the standout features of the JDP-20MF is its heavy-duty 1 HP motor. This powerful motor ensures consistent performance, capable of handling a wide range of materials from softwoods to hardwoods with ease. With a variable speed control that ranges from 140 to 3000 RPM, users can easily adjust the speed according to the material and drilling requirements, ensuring optimal results for each application.

The JDP-20MF comes equipped with a 20-inch swing, which allows users to drill holes in larger workpieces without the need for repositioning. Its substantial table measures 12-1/2 inches by 24 inches, providing ample support and stability for large pieces. The table is also adjustable, tilting up to 30 degrees left and right, catering to a variety of drilling angles and tasks.

Another notable technology integrated into the JDP-20MF is the laser guide system. This feature projects a laser beam onto the workpiece, ensuring precise alignment and accurate drilling. This not only increases efficiency but also reduces the likelihood of costly mistakes, making it an invaluable tool for meticulous woodworkers.

Safety is paramount in the design of the JDP-20MF, as evidenced by its built-in safety key, which prevents accidental start-ups, and its sturdy metal housing that minimizes vibrations during operation. The drill press also features a work light to illuminate the drilling area, enhancing visibility and precision.

In summary, the Jet Tools JDP-20MF is a robust and feature-rich drill press that excels in both performance and versatility. With its powerful motor, variable speed settings, generous swing and table size, laser guide system, and focus on safety, it is an excellent choice for anyone looking to elevate their woodworking projects. Whether for a professional workshop or a home garage, the JDP-20MF stands out as a reliable and efficient drilling solution.
Top Page Image Contents