Powermatic instruction manual Specifications 3520A Lathe

SPECIFICATIONS: 3520A Lathe

Table with standard extensions	28” x 38”
Distance Between Centers	34-1/2"
Swing Over Bed	20"
Overall Length	50"
Spindle Speeds	0-1200 / 0-3200 RPM
Motor	2HP, 220V
Lathe Power Requirements	220V, 3PH or 1PH
Spindle Thread Size	1-1/4" x 8 T.P.I.
Head/Tailstock Taper	#2 Morse
Height	44" (Adjustable)
Weight	650 lbs
Tailstock Quill Travel	Over 4"
3" Faceplate	standard
14" Toolrest	standard
Drive System	Poly V Belt, Inverter Drive
Spindle Lock	standard
Knock Out Rod	standard
Drive Center	standard
Ball Bearing (live) Center	standard
Hole through Tail Stock Spindle	3/8"
Hole through Head Stock Spindle	5/8"
Footprint of stand	50" L x 24" W

NOTE: The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Powermatic reserves the right to change specifications without notice and without incurring obligations.

7