Delta 36-550, 36-560 w/stand) instruction manual Assembling Blade Guard and Splitter Assembly

Page 9

ASSEMBLING BLADE GUARD AND SPLITTER ASSEMBLY

1.DISCONNECT MACHINE FROM POWER SOURCE.

2.IMPORTANT: THE BLADE GUARD AND SPLITTER ASSEMBLY MUST BE PROPERLY ALIGNED TO THE SAW BLADE IN ORDER TO PREVENT KICKBACK.

3.Position the blade 90 degrees to the table and lock in place.

4.Fasten the splitter support bracket (A) Fig. 9, to splitter bracket (B) using two 1/4-20 x 1/2" Hex Head Screws (C) which were removed from splitter bracket (B) earlier, and two 1/4" external tooth lockwashers as shown. NOTE: Do not completely tighten screws (C) at this time.

5.Locate the 1/4-20 x 2-1/4" hex head screw (G) Fig. 10, and assemble the 1/4" internal tooth lockwasher (O), 1/4" flat washer (P) and 1/4" external tooth lockwasher

(R) onto screw (G).

6.Position recessed end (E) Fig. 11, of splitter bracket

(B) against end of pivot rod (F) and fasten in place using the 1/4-20 x 2-1/4" hex head screw (G) Fig. 12, 1/4" internal tooth lockwasher, 1/4" flat washer and 1/4" external tooth lockwasher which were assembled to screw (G) in STEP 5. NOTE: Do not completely tighten screws (G) at this time.

7.Position the splitter (H) Fig. 13, on the splitter support bracket as shown, making certain the two protrusions

(K) on the splitter support bracket are inside the slot of splitter (H).

G

Fig. 12

A

B

C

Fig. 9

R

P

O

G

Fig. 10

F E

B

Fig. 11

H

K

Fig. 13

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Table Saw General Safety Rules Refer to them often Use them to instruct others Additional Safety Rules for Table SAWPower Connections Motor SpecificationsGrounding Instructions Unpacking and Cleaning Table SAW PartsExtension Cords Page For Model 36-560 only Assembling Blade Raising and Lowering Handwheel AssemblyAssembling Blade Guard and Splitter Assembly Page Assembling Guide Rail to SAW Assembling Extension WingMiter Gage Assembling RIP FenceAssembling Miter Gage Holder Disconnect Machine from Power SourceAssembling Outfeed Support Assembling Stand for Model 36-560 only Assembling SAW to Stand For Model 36-560 onlyFastening SAW to a Supporting Surface Locking Switch OFF Position Operating Controls and AdjustmentsStarting Stopping SAW Overload ProtectionBlade Tilting Control Adjusting 90 and 45 Degree Positive StopsMiter Gage Operation and Adjustments RIP Fence Operation and AdjustmentsChanging the Blade Adjusting Blade Parallel to Miter Gage SlotsOperation CROSS-CUTTINGRipping Using Auxiliary Wood Facing on RIP Fence Constructing a Featherboard Pushstick Accessories PARTS, Service or Warranty Assistance

36-560 w/stand), 36-550 specifications

The Delta 36-550 and Delta 36-560 are versatile table saws designed for both amateur woodworkers and seasoned professionals. These tools stand out in the market due to their robust features, reliability, and precision cutting capabilities.

One of the prominent features of the Delta 36-550 and 36-560 is their powerful motor. Both models are equipped with a 15-amp motor that provides ample power to handle a variety of wood types, from softwoods to hard species. This makes them suitable for a wide range of cutting applications, whether for general woodworking projects or more intricate tasks.

Both models come with a 10-inch blade diameter, allowing for significant cutting depth and width. The 36-550 offers a maximum cutting depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees, while the 36-560 matches these specifications, ensuring that users have ample capacity for various wood thicknesses.

The precision fence system is another noteworthy characteristic. The exclusive Delta T2 tool-free fence system ensures smooth operation and accuracy, allowing woodworkers to make straight, clean cuts consistently. The fence is easy to adjust and locks securely, providing confidence during operation.

Safety is a crucial factor in woodworking, and both models incorporate several features to protect users. The blade guard system is transparent, allowing for visibility during cuts while providing necessary protection. Furthermore, the onboard storage for accessories, as well as a sturdy table design, facilitates a tidy workspace.

Both the Delta 36-550 and 36-560 come equipped with a heavy-duty steel stand, ensuring stability during use. The stand is designed for easy setup and provides a solid base, significantly reducing vibrations during operation. This characteristic enhances safety and improves overall cutting precision.

Additionally, both saws feature a dust port that connects to a vacuum system, promoting a clean working environment. Reducing dust not only keeps the workspace tidy but also improves visibility and safety during cutting operations.

In summary, the Delta 36-550 and 36-560 table saws combine power, precision, and safety into a robust package ideal for any woodworking enthusiast. With features like a reliable motor, precise fence system, enhanced safety protocols, and sturdy construction, these table saws stand out as excellent choices for anyone looking to elevate their woodworking projects.
Top Page Image Contents