Delta 36-312 Foreword, Attaching Dust BAG, Moving Cuttinghead to the UP Position

FUNCTIONAL DESCRIPTION

FOREWORD

Delta Model 36-312 is a high capacity 12" single-bevel compound miter saw designed to cut wood and non-ferrous metals. This machine is supplied with new design features that increase the cutting capacity. This machine can cut 6" base moulding mounted vertically, crosscut 2" x 8" dimensional lumber, miter 2" x 6" dimensional lumber at 45° both left and right, and bevel 2" x 8" dimensional lumber left at 45°. It has positive miter stops at 0°, 15°, 22.5°, 31.6, and 45° both left and right, and bevel stops at 0°, 33.9°, and 45° left.

CARTON CONTENTS

1 - Miter Saw

2 - Dust bag

3 - Dust Spout

4 - Wrench

5 - 2mm hex wrench

6 - Open end 7/16" wrench

1
2	5	6
	3

4

Fig. 2

ASSEMBLY AND OPERATION

C

A

DA B

B

Fig. 3 Fig. 3A

ATTACHING DUST BAG

1.Attach dust spout (A) Fig. 3 to port (B).

2.Depress spring clips (C) Fig. 3 of dust bag (D) and clip dust bag (D) over rib of dust spout (A).

MOVING CUTTINGHEAD TO THE UP POSITION

Push down on the handle (B) Fig. 3A, pull out cutting- head lockpin and move the cuttinghead (B) to the up position (Fig. 4).

Fig. 4

6