Delta 36-312 instruction manual Failure to Follow These Rules MAY Result in Serious Injury

Page 3

GENERAL SAFETY RULES

FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURY.

1.FOR YOUR OWN SAFETY, READ THE INSTRUC- TION MANUAL BEFORE OPERATING THE MACHINE. Learning the machine’s application, limitations, and specific hazards will greatly mini- mize the possibility of accidents and injury.

2.USE CERTIFIED SAFETY EQUIPMENT. Eye protection equipment should comply with ANSI Z87.1 standards, hearing equipment should comply with ANSI S3.19 standards, and dust mask protection should comply with MSHA/NIOSH certified respirator standards. Splinters, air-borne debris, and dust can cause irritation, injury, and/or illness.

3.DRESS PROPERLY. Do not wear tie, gloves, or loose clothing. Remove watch, rings, and other jewelry. Roll up your sleeves. Clothing or jewelry caught in moving parts can cause injury.

4.DO NOT USE THE MACHINE IN A DANGEROUS ENVIRONMENT. The use of power tools in damp or wet locations or in rain can cause shock or electrocution. Keep your work area well-lit to prevent tripping or placing arms, hands, and fingers in danger.

5.MAINTAIN ALL TOOLS AND MACHINES IN PEAK CONDITION. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories. Poorly maintained tools and machines can further damage the tool or machine and/or cause injury.

6.CHECK FOR DAMAGED PARTS. Before using the machine, check for any damaged parts. Check for alignment of moving parts, binding of moving parts, breakage of parts, and any other conditions that may affect its operation. A guard or any other part that is damaged should be properly repaired or replaced. Damaged parts can cause further damage to the machine and/or injury.

7.KEEP THE WORK AREA CLEAN. Cluttered areas and benches invite accidents.

8.KEEP CHILDREN AND VISITORS AWAY. Your shop is a potentially dangerous environment. Children and visitors can be injured.

9.REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure that the switch is in the “OFF” position before plugging in the power cord. In the event of a power failure, move the switch to the “OFF” position. An accidental start-up can cause injury.

10.USE THE GUARDS. Check to see that all guards are in place, secured, and working correctly to prevent injury.

11.REMOVE ADJUSTING KEYS AND WRENCHES BEFORE STARTING THE MACHINE. Tools, scrap pieces, and other debris can be thrown at high speed, causing injury.

12.USE THE RIGHT MACHINE. Don’t force a machine or an attachment to do a job for which it was not designed. Damage to the machine and/or injury may result.

13.USE RECOMMENDED ACCESSORIES. The use of accessories and attachments not recommend- ed by Delta may cause damage to the machine or injury to the user.

14.USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage, resulting in loss of power and overheating. See the Extension Cord Chart for the correct size depending on the cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

15.SECURE THE WORKPIECE. Use clamps or a vise to hold the workpiece when practical. Loss of control of a workpiece can cause injury.

16.FEED THE WORKPIECE AGAINST THE DIRECTION OF THE ROTATION OF THE BLADE, CUTTER, OR ABRASIVE SURFACE. Feeding it from the other direction will cause the workpiece to be thrown out at high speed.

17.DON’T FORCE THE WORKPIECE ON THE MACHINE. Damage to the machine and/or injury may result.

18.DON’T OVERREACH. Loss of balance can make you fall into a working machine, causing injury.

19.NEVER STAND ON THE MACHINE. Injury could occur if the tool tips, or if you accidentally contact the cutting tool.

20.NEVER LEAVE THE MACHINE RUNNING UNATTEN- DED. TURN THE POWER OFF. Don’t leave the machine until it comes to a complete stop. A child or visitor could be injured.

21.TURN THE MACHINE “OFF”, AND DISCONNECT THE MACHINE FROM THE POWER SOURCE before installing or removing accessories, before adjusting or changing set-ups, or when making repairs. An accidental start-up can cause injury.

22.MAKE YOUR WORKSHOP CHILDPROOF WITH PADLOCKS, MASTER SWITCHES, OR BY REMOVING STARTER KEYS. The accidental start-up of a machine by a child or visitor could cause injury.

23. STAY ALERT, WATCH WHAT YOU ARE DOING,

AND USE COMMON SENSE. DO NOT USE THE MACHINE WHEN YOU ARE TIRED OR UNDER THE INFLUENCE OF DRUGS, ALCOHOL, OR MEDICATION. A moment of inattention while operating power tools may result in injury.

24.THE DUST GENERATED by certain woods and wood products can be injurious to your health. Always operate machinery in well-ventilated areas, and provide for proper dust removal. Use wood dust collection systems whenever possible.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Single-Bevel Compound Miter Saw Safety Guidelines Definitions General Safety RulesImportant Safety Instructions Stay ALERT, Watch What YOU are Doing Failure to Follow These Rules MAY Result in Serious InjuryAdditional Safety Rules for Miter Saws Unpacking Power ConnectionsMotor Specifications Extension CordsForeword Attaching Dust BAGMoving Cuttinghead to the UP Position ED E Moving Table to the 0 CUT-OFF PositionFence Operation Fastening Machine to Supporting SurfaceRotating Table for Miter Cutting Locking Switch in the OFF PositionConstructing Work Support Extensions Starting and Stopping MachineTable Hazard Zone Adjusting Sliding FIT Between Movable Table and BaseAdjusting Fence 90 to Blade Disconnect the Machine from the Power SourceSelecting 0, 33.9, and 45 Bevel Positive Stops Adjusting 0, 33.9, and 45 Bevel Positive StopsDisconnect Machine from Power Source Tilting Cuttinghead for Bevel CuttingAdjusting Sliding FIT Between Cuttinghead ARM and Trunnion Adjusting the Bevel LockAdjusting Sliding FIT Between Trunnion and Bevel Bracket Adjusting the Tension of Cuttinghead Return SpringCutting Aluminum Adjusting Lower Blade GuardTypical Operations and Helpful Hints Auxiliary Wood FenceCutting Crown Moulding Cutting Bowed MaterialChanging the Blade MaintenanceKeep Tool Clean Failure to StartBrush Inspection and Replacement AccessoriesTwo Year Limited New Product Warranty Arizona Illinois Minnesota Canadian PORTER-CABLE Delta Service Centers

36-312 specifications

The Delta 36-312 is a table saw that has gained a reputation among woodworkers and DIY enthusiasts for its robust performance and high-quality construction. This tool is designed for both professionals and hobbyists looking to achieve precise cuts in various materials, making it a versatile addition to any workshop.

One of the standout features of the Delta 36-312 is its powerful 15-amp motor, which provides ample power for handling a wide range of cutting tasks. This motor allows the saw to maintain consistent speeds even when cutting through denser materials, ensuring smooth, uniform results every time.

The design of the Delta 36-312 includes a massive cast iron table, which offers stability and durability while reducing vibration during operation. At 40 inches in length, the table provides ample workspace for larger projects and facilitates easier handling of sizable sheets of plywood or lumber. The surface finish is meticulously polished, promoting easy gliding of materials during cuts.

Another significant feature of the Delta 36-312 is its advanced fence system. The Biesemeyer-style fence is designed for quick and accurate adjustments, allowing users to make precise cuts quickly. This fence can be locked securely in place, ensuring that it will not shift during use, which is crucial for maintaining cutting accuracy.

The saw also integrates a riving knife technology that enhances safety by reducing the risk of kickback. This feature allows for smoother operation and is an essential aspect of modern table saw design. In addition, the saw includes a dust collection system that helps maintain a cleaner workspace by minimizing sawdust during operation.

For ease of transport and maneuverability, the Delta 36-312 is equipped with sturdy wheels, allowing it to be easily moved around the workshop or stored away when not in use. The assembly process is relatively straightforward, with most components easily fitting together without the need for specialized tools.

Overall, the Delta 36-312 represents a blend of power, precision, and safety features that cater to a wide range of woodworking needs. Its combination of a powerful motor, stable table, advanced fence system, and safety technologies makes it a standout choice for anyone serious about woodworking, whether they are professionals or hobbyists seeking to elevate their craft.
Top Page Image Contents