Delta 28-348 instruction manual Metal/Wood Cutting Band Saw

Page 1

14" Metal/Wood Cutting Band Saw

(Model 28-348)

INSTRUCTION MANUAL

PART NO. 426-03-651-0013 - 1-31-06

Copyright © 2006 Delta Machinery

To learn more about DELTA MACHINERY

visit our website at: www.deltamachinery.com.

For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Image 1

Contents Metal/Wood Cutting Band Saw Important Safety Instructions Safety Guidelines DefinitionsStay ALERT, Watch What YOU are DOING, Additional Safety Rules For Band Saws Power Connections Functional Description Unpacking and Cleaning Band SAW Parts Motor Bracket To Cabinet AssemblyMotor to Motor Bracket Dust Chute TOP Plate to CabinetStand Door to Stand Sure the Hinge Pins a are Pointed UP AS Shown in FigsDust Port Tighten the Screws AT this Time Hinge Opening is Pointing DownSAW to Stand Disconnect Machine from Power SourceMotor Pulley Belt to SAW and Motor PulleyAre Positioned AS Shown in FIG Table to SAWTable Insert Blade to SAWLength Blades On / OFF Switch To Stand Locking Switch in the OFF Position Operating Controls and AdjustmentsStarting Stopping SAW Tilting the TableTo adjust the 90 degree stop Adjusting Table StopsAdjusting Blade Tension Never Track the Blade While Tool is Running Tracking the BladeChanging Speeds Adjusting Lower Blade Guides and Blade Support BearingCD C OperationsCutting Curves Troubleshooting GuideTrouble Band SAW does not Come UP to Speed Suggested Metal Cutting Blades and Speeds Band SAW BladesChanging the Blades MaintenanceLubrication PARTS, Service or Warranty Assistance AccessoriesCanadian PORTER-CABLE Delta Service Centers