Delta 34-814, 34-806, 34-801 instruction manual Functional Description, Carton Contents

Page 6

422-04-651-0064 - 06-20-05.qxd 6/20/05 1:42 PM Page 6

POWER CONNECTIONS

A separate electrical circuit should be used for your machines. This circuit should not be less than #12 wire and should be protected with a 20 Amp time lag fuse. Before connecting the machine to the power line, make sure the switch is in the “OFF” position and be sure that the electric current is of the same characteristics as indicated on the machine. All line connections should make good contact. Running on low voltage will damage the machine.

DO NOT EXPOSE THE MACHINE TO RAIN OR OPERATE THE MACHINE IN DAMP LOCATIONS.

MOTOR SPECIFICATIONS

Your machine is wired for 230 Volt, 60 HZ alternating current. Before connecting the machine to the power source, make sure the switch is in the “OFF” position.

GROUNDING INSTRUCTIONS

THIS MACHINE MUST BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR FROM ELECTRIC SHOCK.

Permanently connected machines:

If the machine is intended to be permanently connected, all wiring must be done by a qualified electrician and conform to the National Electric Code and all local codes and ordinances.

*THREE PHASE OPERATION: Three phase machines are not supplied with a power cord and must be permanently connected to a building’s electrical system. Extension cords can’t be used with a three phase machine.

*LVC MAGNETIC MOTOR CONTROL: If you purchased a machine that has a Low Voltage Magnetic Motor Control System, refer to its instruction manual for installation guidance.

FUNCTIONAL DESCRIPTION

FOREWORD

The Delta Unisaw is a 10" right tilting arbor saw. The Delta Unisaw features set the standards in the table saw industry.

NOTICE: The photo on the manual cover illustrates the current production model. All other illustrations contained in the manual are representative only and may not depict the actual labeling or accessories included. These are are intended to illustrate technique only.

CARTON CONTENTS

1

1.

Unisaw

 

 

 

2.

Switch (shown with a LVC switch)

 

 

 

2

 

 

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Unisaw 10 Right Tilting Arbor Saw Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules Important Safety InstructionsAdditional Specific Safety Rules Failure to Follow These Rules MAY Result in Serious InjuryCarton Contents Functional DescriptionUnpacking and Cleaning 11AAssembly Time Estimate AssemblyAssembly Tools Required Installing the Blade Tilting HandwheelAttaching the LVC ON/OFF Switch Attaching the LVC Starter BOX to the CabinetWing Attaching the Magnetic Starter ON/OFF Switch Attaching the Blade Guard and Splitter AssemblyDisconnect the Machine from the Power Source 422-04-651-0064 06-20-05.qxd 6/20/05 142 PM 422-04-651-0064 06-20-05.qxd 6/20/05 143 PM Fastening the Motor Cord to the SAW Frame Attaching Motor CoverMiter Gauge Holder and Wrench Holder Attaching the RIP Fence Holder BracketsAttaching the Dust Chute Adapter Operation Adjusting 90 and 45 Degree Positive Stops Adjusting the TableDisconnect Machine from Power Source Adjusting the Table Insert Miter Gauge Operation and AdjustmentCommon Sawing Operations CROSS-CUTTINGRipping Constructing a Push StickRipping on Left Side of SAW Blade Accessory Moulding Cutterhead Using Moulding CutterheadUsing the Accessory Dado Head Using Auxiliary Wood Facing on RIP Fence Constructing a FeatherboardPushstick Troubleshooting Maintenance Replacing Belts and Adjusting Belt TensionChanging the SAW Blade Service AccessoriesWarranty Two Year Limited New Product WarrantyCanadian PORTER-CABLE Delta Service Centers
Related manuals
Manual 28 pages 38.89 Kb

34-801, 34-806, 34-814 specifications

Delta has long been a reputable name in the woodworking industry, and its line of table saws, including models such as the Delta 36-812, 34-814, 34-806, and 34-801, exemplifies the brand's commitment to quality and innovation. Each of these models offers unique features and technologies tailored to meet the needs of both professional woodworkers and hobbyists.

The Delta 36-812 is a compact yet powerful table saw designed for versatility and efficiency. This model features a 15-amp motor, capable of delivering 4,800 RPM, providing sufficient power for cutting through various materials including hardwood and softwood. One of the standout features of the 36-812 is its Portable Stand, which allows easy transportation and setup without compromising stability. The saw also boasts a large, adjustable rip fence, ensuring accuracy when making long cuts.

Next in line is the Delta 34-814, which takes things up a notch with its more advanced design. This cabinet saw is built with a one-piece, rigid steel frame that minimizes vibrations, contributing to cleaner cuts. The 34-814 also features a 1.5 HP motor, providing reliable power and performance in any workshop setting. Its patented Quick-Build T-Square System offers smooth adjustments for crosscuts and rip cuts, enhancing user convenience, while the large table surface provides plenty of workspace for larger projects.

For those looking for a reliable saw that combines performance with compactness, the Delta 34-806 makes a strong case. This model is equipped with a 1 HP motor and features a sturdy, lightweight construction which makes it ideal for smaller workshops or job sites. It boasts a patented fence system that is easy to use and adjust, along with a durable blade guard for enhanced safety. The compact design does not sacrifice cutting power, allowing woodworkers to tackle a variety of materials with ease.

Lastly, the Delta 34-801 is a classic contractor saw that captures the essence of performance and portability. It features a powerful 1.5 HP motor and a 30-inch rip capacity, perfect for larger woods and panels. The saw includes an easy-to-use rack and pinion fence system that improves accuracy and alignment. Its folding stand allows for effortless storage, making it a great option for those who need to maximize space.

In summary, the Delta 36-812, 34-814, 34-806, and 34-801 are all exemplary offerings in Delta's lineup, each designed with specific features and capabilities. From compact options to more robust cabinet designs, these saws cater to the diverse needs of woodworkers across various skill levels and applications. With their combination of power, precision, and innovative technologies, they continue to uphold Delta's legacy of excellence in woodworking tools.
Top Page Image Contents