Bush Hog FC-BL-0002 manual Operation

Page 34
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las medidas de seguridad. (SG-3)
Operation Section 4-2
OPERATION
BUSH HOG 100 SERIES REAR MOUNTED BLADE
OPERATION INSTRUCTIONS
Your Bush Hog 100 Series should now be assembled and inspected for any evidence of defective or damaged parts before use. Any evidence of damage should be reported to your dealer immediately.
This section of the Operator’s Manual is designed to familiarize, instruct, and educate safe and proper blade use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in explaining the operation of a blade. Some pictures may show shields removed for purposes of clarity. NEVER OPERATE this implement without all shields in place and in good operational condition. The operator must be familiar with the blade and tractor operation and all associated safety practices before operating the blade and tractor. Proper operation of the blade, as detailed in this manual, will help ensure years of safe and satisfactory use of the rear blade.
READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND IMPLEMENT. If you do not understand any of the instructions, contact your nearest authorized dealer for a full explanation. Pay close attention to all safety signs and safety messages contained in this manual and those affixed to the implement and tractor. OPS-U- 0001
READ, UNDERSTAND, and FOLLOW the following Safety Messages. Serious injury or death may occur unless care is taken to follow the warnings and instructions stated in the Safety Messages. Always use good common sense to avoid hazards. (SG-2)

OPERATION

100 Series 08/10

© 2010 Alamo Group Inc.

Image 34
Contents Series Warranty Information To the Owner/Operator/DealerTable of Contents Page Safety Section Safety Safety MessagesSeries 08/10 Safety Section Safety Safety Safety S3PT-02 Parts Information See Your Bush HOG DealerDecal Location Instruct PeligroReflect LogoDecal Description Safety Logo Product Name Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Before Operating this Machine Assembly Section Assembly Planer Wheel Operation Special NoticeFigure Asm-0003or optional Manual Adjusting Links Gauge Wheel Extra Equipment Skid Shoes & Quick Tack End Plates Extra EquipmentSelector Valve Accessory Equipment Hydraulic SystemHydraulic Control Valve Accessory Equipment Page Operation Section Operation Operation CAT I-II, QHOperator Requirements Personal Protective Equipment PPETractor Requirements Tractor HorsepowerRops and Seat Belt Getting on and OFF the Tractor Front End WeightTractor 3-Point Hitch Boarding the Tractor Dismounting the TractorConnecting the Rear Blade to the Tractor Starting the TractorConnecting the Rear Blade PRE-OPERATION Inspection and Service Tractor Pre-Operation Inspection/ServiceBlade Pre-Operation Inspection/Service Do not Operate an Unsafe Tractor or Implement Blade & Box Blade PRE-OPERATION Inspection Driving the Tractor and Implement Brake and Differential Lock Setting Starting the TractorDriving the Tractor and Blade Operating the Tractor and ImplementOperating the Blade Disconnecting the Blade from the Tractor Shutting Down the ImplementBlade Storage Transporting the Tractor and Implement Transporting on Public RoadwaysOperation Hauling the Tractor and Implement Operation Troubleshooting Guide Problem Possible Cause RemedyOperation Maintenance Section Maintenance Proper Torque For Fasteners Bush HOG Required of the Owner Required of the OperatorSeries Rear Mounted Blade