Bush Hog FC-BL-0002 manual Boarding the Tractor, Dismounting the Tractor

Page 39
(SG-9)
(SG-10)
(SG-11)

OPERATION

4.1 Boarding the Tractor

Use both hands and equipped handrails and steps for support when boarding the tractor. Never use control levers for support when mounting the tractor. Seat yourself in the operator’s seat and secure the seat belt around you.

Never allow passengers to ride on the tractor or attached equipment. Riders can easily fall off and be seriously injured or killed from falling off and being ran over. It is the operator’s responsibility to forbid all extra riders at all times. OPS-U- 0008

Never allow children to operate, ride on, or come close to the Tractor or Implement. Usually, 16-17 year-old children who are mature and responsible can operate the implement with adult supervision, if they have read and understand the Operator’s Manuals, been trained in proper operation of the tractor and Implement, and are physically large enough to reach and operate the controls easily.

Never allow children or other persons to ride on the Tractor or Implement.

Falling off can result in serious injury or death.

4.2 Dismounting the Tractor

Before dismounting, park the tractor and implement on a reasonably level surface, apply the parking brake, idle the engine down, disengage the PTO, and lower the implement to the ground. Shut down the tractor engine according to the operator’s manual, remove the key, and wait for all motion to completely stop. Never leave the seat until the tractor, its engine and all moving parts have come to a complete stop.

Use hand rails and steps when exiting the tractor. Be careful of your step and use extra caution when mud, ice, snow or other matter has accumulated on the steps or hand rails. Use all handrails and steps for support and never rush or jump off the tractor. OPS-U- 0009

BEFORE leaving the tractor seat, always set the parking brake and/or set the tractor transmission in parking gear, disengage the PTO, stop the engine, remove the key, and wait for all moving parts to stop. Place the tractor shift lever into a low range or parking gear to prevent the tractor from rolling. Never dismount a Tractor that is moving or while the engine is running. Operate the Tractor controls from the tractor seat only.

100 Series 08/10

Operation Section 4-7

© 2010 Alamo Group Inc.

OPERATION

Image 39
Contents Series To the Owner/Operator/Dealer Warranty InformationTable of Contents Page Safety Section Safety Messages SafetySeries 08/10 Safety Section Safety Safety Safety S3PT-02 See Your Bush HOG Dealer Parts InformationDecal Location Logo PeligroReflect InstructDecal Description Safety Logo Product Name Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Before Operating this Machine Assembly Section Assembly Operation Special Notice Planer WheelFigure Asm-0003or optional Manual Adjusting Links Skid Shoes & Quick Tack End Plates Extra Equipment Gauge Wheel Extra EquipmentHydraulic System Selector Valve Accessory EquipmentHydraulic Control Valve Accessory Equipment Page Operation Section Operation CAT I-II, QH OperationPersonal Protective Equipment PPE Operator RequirementsTractor Horsepower Tractor RequirementsRops and Seat Belt Front End Weight Getting on and OFF the TractorTractor 3-Point Hitch Dismounting the Tractor Boarding the TractorStarting the Tractor Connecting the Rear Blade to the TractorConnecting the Rear Blade Tractor Pre-Operation Inspection/Service PRE-OPERATION Inspection and ServiceBlade Pre-Operation Inspection/Service Do not Operate an Unsafe Tractor or Implement Blade & Box Blade PRE-OPERATION Inspection Driving the Tractor and Implement Starting the Tractor Brake and Differential Lock SettingOperating the Tractor and Implement Driving the Tractor and BladeOperating the Blade Shutting Down the Implement Disconnecting the Blade from the TractorBlade Storage Transporting on Public Roadways Transporting the Tractor and ImplementOperation Hauling the Tractor and Implement Operation Problem Possible Cause Remedy Troubleshooting GuideOperation Maintenance Section Maintenance Proper Torque For Fasteners Bush HOG Required of the Operator Required of the OwnerSeries Rear Mounted Blade