Bush Hog FC-BL-0002 manual Operation

Page 56

OPERATION

OPERATION

Problem

Possible Cause

Remedy

 

 

 

Hydraulic Pump not shutting

Using Open Center Valve

Replace Valve or Conversion Plug

off on Closed Center System

 

and Main Relief

 

Open Center Conversion Plug

Replace with Closed Center Plug

 

Pumping over Relief Valve

Replace with No Relief Plug

 

 

 

Oil leaking at hose connection

Connection not tight

Tighten connection

 

Did not use sealant

Apply a good sealant to connection

 

Connection cracked from over-

Replace cracked connection

 

tightening

 

 

Mismatched Connection threads

Use correct connectors

 

or types

 

100 Series 08/10

Operation Section 4-24

© 2010 Alamo Group Inc.

Image 56
Contents Series Warranty Information To the Owner/Operator/DealerTable of Contents Page Safety Section Safety Safety MessagesSeries 08/10 Safety Section Safety Safety Safety S3PT-02 Parts Information See Your Bush HOG DealerDecal Location Peligro ReflectInstruct LogoDecal Description Safety Logo Product Name Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Before Operating this Machine Assembly Section Assembly Planer Wheel Operation Special NoticeFigure Asm-0003or optional Manual Adjusting Links Gauge Wheel Extra Equipment Skid Shoes & Quick Tack End Plates Extra EquipmentSelector Valve Accessory Equipment Hydraulic SystemHydraulic Control Valve Accessory Equipment Page Operation Section Operation Operation CAT I-II, QHOperator Requirements Personal Protective Equipment PPERops and Seat Belt Tractor HorsepowerTractor Requirements Tractor 3-Point Hitch Front End WeightGetting on and OFF the Tractor Boarding the Tractor Dismounting the TractorConnecting the Rear Blade to the Tractor Starting the TractorConnecting the Rear Blade PRE-OPERATION Inspection and Service Tractor Pre-Operation Inspection/ServiceBlade Pre-Operation Inspection/Service Do not Operate an Unsafe Tractor or Implement Blade & Box Blade PRE-OPERATION Inspection Driving the Tractor and Implement Brake and Differential Lock Setting Starting the TractorOperating the Blade Operating the Tractor and ImplementDriving the Tractor and Blade Disconnecting the Blade from the Tractor Shutting Down the ImplementBlade Storage Transporting the Tractor and Implement Transporting on Public RoadwaysOperation Hauling the Tractor and Implement Operation Troubleshooting Guide Problem Possible Cause RemedyOperation Maintenance Section Maintenance Proper Torque For Fasteners Bush HOG Required of the Owner Required of the OperatorSeries Rear Mounted Blade