SPECIFICATIONS
Maximum Blade Diameter | 7" | |
|
| |
Arbor Hole | 5/8" | |
|
| |
Maximum Cutting Capacity | ||
3/4" @ 45° | ||
Tilting Head | 45° | |
Electrical Requirements | 120 V~ / 60 Hz / 10 A | |
Blade Rated Speed | 5000 RPM | |
|
| |
Water Pump | Maximum Flow = 160 | |
GPH | ||
| ||
Stand (SKU 98328) | Sold separately | |
|
|
Note: Recommend Blades:
SKU 67047: 7” Turbo Diamond Blade (Wet or Dry) (sold separately)
SKU 67111: 7” Diamond Wet Blade (sold separately)
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
List of contents
Part(s) | Description | Qty |
1 | Arbor Wrench | 1 |
2 | Clamp Assembly | 1 |
3 | Miter Gauge | 1 |
4 | Socket Wrench | 1 |
INSTRUCTIONS FOR PUTTING
INTO USE
TO PREVENT SERIOUS INJURY
FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Assembly
1.Keep your work area clean and well lit. Cluttered and dark work areas invite accidents.
2.Do not operate power tools in ex- plosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3.Keep bystanders, children, and visi- tors away while operating a power tool. Distractions can cause you to lose control.
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
SKU 98265 | For technical questions, please call | Page 11 |