Atlas 544099, 447299 manual Configuration Variables

Page 5

Atlas #544099 and #447399 DCC Decoders

5

your DCC system are specified in the user manual of the particular system that are using. Note: In order for newly programmed CV values to take effect after service mode programming, the decoder must go through a power reset. If your DCC command station does not support automatic power reset, simply rock the locomotive off the track after programming.

Configuration Variables

Atlas #544099 and #447299 DCC decoders support a range of features, which are activated by setting configuration variables. All the configuration variables are numbered. These numbers are used during programming and are identical for all decoders that conform to the NMRA standards, independent of the decoder manufacturer. The following table lists the CVs supported in Atlas VO-1000 DCC decoders. Both CV numbers and Register numbers are provided for cross- reference.

Some CVs (such as CV29) have specific meanings for each bit. In order to conform to the NMRA convention for bit numbering, the bit assignments shown in this table use the bit-numbering scheme of 0 to 7.

Table 1: Configuration Variables (CVs) for Atlas

#544099 and #447299 DCC decoders

CV

Reg.

Description

Range

Default

 

 

 

 

Value**

1

1

Short locomotive address:

1-127

3

 

 

This is the (2-digit) number used to specify to the

 

 

 

 

DCC system the locomotive that you wish to run.

 

 

2

2

Start voltage:

1-15

10

 

 

This is the voltage applied to the motor in speed-

 

 

 

 

step 1. Set this value so that the locomotive just

 

 

 

 

starts moving in speed-step 1.

 

 

3

3

Acceleration Momentum:

1-31

1

 

 

Determines the rate of change of speed upon

 

 

 

 

acceleration. A higher value leads to a slower

 

 

 

 

acceleration.

 

 

4

4

Brake Momentum:

1-31

1

 

 

Determines the rate of change of speed upon

 

 

 

 

braking. A higher value leads to longer braking

 

 

 

 

distances.

 

 

5

5

Contains CV29 (see definition of CV29 below)

0-39

6

Atlas Model Railroad Co., Inc.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Atlas #544099 and #447399 DCC Decoders Preparing to Install an Atlas #544099 or #447299 DCC Decoder Step by Step Installation Programming Atlas #544099 and #447299 DCC Decoders Reg Description Range Default Value Short locomotive address Configuration VariablesDecoder Configuration, Byte Reg Description Range Default Value Version NumberManufacturers Identification1 Extended Address High ByteHeadlight mode Description Range Default ValueUsage on conventional DC layouts Extended AddressingAmount of Headlight Dimming Bit SUMBit Decimal Example Calculating the Default Value for CV29Troubleshooting Decoder Programming Problems For Technical Assistance Dcc@atlasrr.com Atlas Limited One-Year DCC Decoder Warranty

544099, 447299 specifications

Atlas 447299,544099 is a cutting-edge artificial intelligence platform that aims to revolutionize various industries by seamlessly integrating advanced technologies and intelligent data processing. Designed to enhance operational efficiency and drive innovation, Atlas boasts several main features, technologies, and characteristics that set it apart from its competitors.

One of the standout features of Atlas 447299,544099 is its powerful machine learning capabilities. By utilizing state-of-the-art algorithms, it can analyze large datasets, identify patterns, and make predictions that empower organizations to make data-driven decisions. This capability is particularly valuable in industries such as finance, healthcare, and logistics, where timely and accurate insights can significantly impact outcomes.

Moreover, Atlas incorporates natural language processing (NLP), enabling it to understand and generate human language with remarkable accuracy. This functionality allows businesses to create more intuitive customer service solutions, enhance user interactions, and streamline internal communications. The ability to comprehend and respond to queries in real-time opens new avenues for improving customer satisfaction and operational efficiency.

In terms of technologies, Atlas 447299,544099 utilizes cloud computing to offer scalability and flexibility. This allows businesses to leverage the platform's capabilities without requiring extensive on-premises infrastructure. The cloud-based nature also ensures that updates and improvements are rolled out seamlessly, keeping organizations at the forefront of technological advancements.

Another significant characteristic of Atlas is its emphasis on security. With proprietary encryption technologies and robust data protection measures, the platform assures users that their sensitive information remains secure. This focus on security is critical in an age where data breaches are increasingly common, and regulatory compliance is essential for maintaining trust with customers.

Furthermore, Atlas promotes interoperability, enabling it to integrate with existing systems and tools. This characteristic allows organizations to adopt the platform without overhauling their current operations, making the transition smoother and more efficient.

In summary, Atlas 447299,544099 stands out as a powerful and versatile AI-driven platform. With features such as machine learning, natural language processing, cloud computing, and a strong focus on security, it empowers businesses to harness the full potential of their data. By fostering innovation and improving operational workflows, Atlas is poised to play a crucial role in shaping the future of technology across various sectors.
Top Page Image Contents