Black & Decker BDTS100 instruction manual Maintenance, Troubleshooting

Page 25

MAINTENANCE

KEEP MACHINE CLEAN

Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.

Wear ANSI Z87.1 safety glasses while using compressed air.

FAILURE TO START

Should your machine fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet. Also, check for blown fuses or open circuit breakers in the line.

LUBRICATION

Apply household floor paste wax to the machine table and extension table or other work surface weekly.

PROTECTING CAST IRON FROM RUST

To clean and protect cast iron tables from rust, you will need the following materials: 1 pushblock from a jointer, 1 sheet of medium Scotch-Brite™ Blending Hand Pad, 1 can of WD-40®, 1 can of degreaser, 1 can of TopCote® Aerosol. Apply the WD-40 and polish the table surface with the Scotch-Brite pad using the pushblock as a holddown. Degrease the table, then apply the TopCote® accordingly.

 

TROUBLESHOOTING

BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS

TROUBLE! SAW WILL NOT START

 

WHAT’S WRONG?

WHAT TO DO…

1.Saw not plugged in.

1.Plug in saw.

2.Fuse blown or circuit breaker tripped.

2.Replace fuse or reset circuit breaker.

3.Cord damaged.

3.Have cord replaced by authorized service center.

4.Brushes worn out.

4.Have brushes replaced by authorized service center.

TROUBLE! SAW MAKES UNSATISFACTORY CUTS

WHAT’S WRONG?

WHAT TO DO…

1.Dull blade.

1.Replace blade.

2.Blade mounted backwards.

2.Turn blade around.

3.Gum or pitch on blade.

3.Remove blade and clean with turpentine.

4.Incorrect blade for work being done.

4.Change the blade.

TROUBLE! BLADE DOES NOT COME UP TO SPEED

WHAT’S WRONG?

WHAT TO DO…

1.Extension cord too light or too long.

1.Replace with adequate size cord.

2.Low house current.

2.Contact your electric company.

TROUBLE! MACHINE VIBRATES EXCESSIVELY

WHAT’S WRONG?

WHAT TO DO…

1.Stand or bench on uneven floor.

1.Reposition on flat level surface.

2.Damaged saw blade.

2.Replace blade.

Service Information

Black & Decker offers a full network of company-owned and authorized service locations throughout NorthAmerica.All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service.

Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under "Tools—Electric" or call: 1-800-544-6986.

Accessories

Recommended accessories for use with your saw are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call: 1-800-544-6986.

The use of any non-recommended accessory such as dado sets, molding cutters or abrasive wheels may be hazardous.

Full Two-Year Home Use Warranty

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship.The defective product will be replaced or repaired at no charge in either of two ways:

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.

The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required. Black & Decker owned and authorized service centers are listed under "Tools-Electric" in the yellow pages of the phone directory.

This warranty does not apply to accessories.This warranty gives you specific legal rights and you may have other rights which vary from state to state. Should you have any questions, contact the manager of your nearest Black & Decker Service Center.

This product is not intended for commercial use.

FREE WARNING LABELREPLACEMENT: If your warning labels become illegible or are missing, call 1-800-544-6986 for a free replacement.

Black & Decker (U.S.) Inc.,

701 E. Joppa Rd.

Towson, MD 21286 U.S.A.

See ‘Tools-Electric’

– Yellow Pages –

for Service & Sales

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Before Returning this Product For ANY Reason Please Call BDTS100 10 254MM Table SAWImportant Safety Instructions Table of ContentsSafety Guidelines Definitions California Proposition USE of this Tool can Generate General Safety RulesFailure to Follow These Rules MAY Result in Serious Injury Additional Safety Rules for Table SawsMotor Specifications Power ConnectionsGrounding Instructions Functional Description Carton ContentsParts Unpacking and Cleaning AssemblyAssembly Tools Required Elevating and Supporting Surfaces for a SAW with no StandSAW to Stand Assembling StandAttaching Blade Guard and Splitter Assembly Attaching Blade Height Adjusting HandwheelOn the screw L Fig Attaching Miter Gauge Holder Miter GaugeIllustrates the miter gauge D inserted into the holder Assembling RIP FenceBlade Height Adjustment Locking Switch in the OFF PositionOperation Starting and Stopping SAW45 Degree Positive Stop Adjustments Blade Tilt AdjustmentTo Adjust Positive Stop AT 45 Degrees Table Insert Adjustment RIP Fence Operation AdjustmentsAdjusting Blade Parallel to Miter Gauge Slots Miter Gauge Operation AdjustmentsCROSS-CUTTING Changing the BladeConstructing a Push Stick RippingAccessory Dado Cutterhead Using Auxiliary Wood Facing on RIP FenceDado Head SET Table Insert Constructing a Push Stick PushstickConstructing a Featherboard Troubleshooting MaintenanceBanc DE Scie BDTS100 254 MM 10 PO Directives DE Sécurité Importantes Table DES MatièresLignes Directrices EN Matière DE Sécurité Définitions Proposition 65 DE LA CalifornieDirectives DE Sécurité Importantes Règles Générales DE SécuritéConserver CES Directives Règles DE Sécurité Supplémentaires Pour LES Bancs DE ScieCaractéristiques Techniques DU Moteur Connexions ÉlectriquesDirectives DE Mise À LA Terre Description Fonctionnelle Rallonges ÉlectriquesContenu DU Carton AVANT-PROPOSDésemballage ET Nettoyage AssemblageOutils Nécessaires Pour L’ASSEMBLAGE Scie SUR Socle Assemblage DU SocleFixation DU Volant Servant À Régler LA Hauteur DE LA Lame Fixation DE L’ENSEMBLE PARE-MAIN/COUTEAU SéparateurJauge À Onglet FonctionnementFixation DU Support DE LA Jauge À Onglet Assemblage DU Guide LongitudinalRéglage DE LA Hauteur DE LA Lame Verrouiller L’INTERRUPTEUR EN Position D’ARRETRéglage DE L’INCLINAISON DE LA Lame Réglages DES Butées Fixes À 90 ET 45 DegrésUtilisation DE LA Jauge À Onglet ET Réglages Réglage DE Linsert DE TableChangement DE LA Lame Sciage EN Long TronçonnageFraise Accessoire À Rainurer Construire UN Poussoir EntretienConstruire UNE Planche EN Éventail Quel EST LE Problème ? QUE FAIRE… Dépannage555326-7100 Instrucciones Importantes Sobre Seguridad ÍndiceNormas DE Seguridad Definiciones LA Propuesta 65 DE CaliforniaInstrucciones Importantes Sobre Seguridad Normas Generales DE SeguridadMantenga LOS BRAZOS, LAS Manos y LOS Dedos lejos de la hoja Normas DE Seguridad Adicionales Para LAS Sierras DE MesaEspecificaciones DEL Motor Conexiones EléctricasInstrucciones DE Conexión a Tierra Contenido DE LA Caja Descripción DE LAS FuncionesCables Prolongadores IntroducciónDesembalaje Y Limpieza MontajeHerramientas Necesarias Para EL Montaje Superficies DE Apoyo Y Elevación Para UNA Sierra SIN BaseSierra a LA Base Montaje DE LA BaseColocación DEL Volante Para Ajustar LA Altura DE LA Hoja Calibrador DE Inglete Colocación DEL Ensamble DE Guarda DE LA Hoja Y HedidorColocación DEL Sujetador DEL Calibrador DE Inglete Operación Operación DE LA Guía DE Corte Y Ajustes Ajustes DE Topes Positivos a 90 Y 45 GradosAjuste DEL Inserto Para Mesa Ajustar UN Tope Positivo a 45 GradosCambio DE LA Hoja Operación DEL Calibrador DE Inglete Y AjustesCorte Longitudinal Corte TransversalVara Para Empujar Construcción DE UN Palo DE Empujar Cabezal Portacuchilla Accesorio Para RanurasConstrucción DE UNA Tabla DE Canto Biselado Mantenimiento Detección DE ProblemasInformación de mantenimiento

BDTS100 specifications

The Black & Decker BDTS100 is a versatile and highly efficient oscillating tool designed for homeowners and professionals alike. Capable of tackling a wide range of projects, the BDTS100 stands out due to its innovative technologies and user-centric features.

One of the main attributes of the BDTS100 is its powerful motor, which delivers an impressive performance while maintaining user comfort. The 2.5 amp motor operates at varying speeds, ensuring optimal control for different applications. This functionality is especially useful for tasks ranging from sanding to cutting, allowing users to adjust the tool's performance based on the materials and requirements at hand.

Versatility is a hallmark of the BDTS100. It comes equipped with a quick-change accessory system that enables users to switch between various attachments with ease. This system significantly reduces downtime, allowing for seamless transitions when moving from one task to another. The oscillating motion of the BDTS100 allows for smooth cuts without the risk of kickback, making it a safe option for both novice and experienced users.

The BDTS100 also features an ergonomic design that offers comfort during prolonged use. The slim, lightweight body ensures that users can maneuver the tool in tight spaces without sacrificing control. Additionally, the rubberized grip provides added comfort and reduces vibrations, allowing for extended use without fatigue.

In terms of technological advancements, the BDTS100 benefits from Black & Decker's commitment to innovation. The integrated dust extraction port helps keep work areas clean, while also enhancing visibility when cutting or sanding. This feature is especially important for users concerned about maintaining a tidy workspace or for those working on detailed projects.

Moreover, the BDTS100 is compatible with a wide range of accessories, making it adaptable for various tasks, including sanding, grinding, scraping, and cutting. Whether tackling home improvement projects or professional tasks, this oscillating tool is designed to meet a variety of needs.

In conclusion, the Black & Decker BDTS100 is a powerful, versatile, and user-friendly oscillating tool. Its features, including a robust motor, quick-change accessory system, ergonomic design, and integrated dust extraction, make it an ideal choice for anyone looking to enhance their toolkit. Whether for a DIY project or professional work, the BDTS100 is engineered to deliver performance and convenience.
Top Page Image Contents