|
| Specifications | ||
|
|
|
|
|
| Motor |
| 120 V~ / 60 Hz / 1500 W / 1 Phase, 2 HP |
|
| Speed |
| 3400 RPM |
|
| Blade Size |
| 14” Diameter x 1” Arbor (Not Included) |
|
| Miter Angle |
|
| |
| Table Size |
|
| |
| Cutting |
| Steel Pipe - 4” Dia. x 1/4” Wall Thickness |
|
| Capacities |
| Angle Iron - 3” x 3” x 1/2” Wall Thickness |
|
|
|
| Solid Steel - |
|
Vise Assembly and Spanner Wrench Included.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1.Avoid working alone. If an accident happens, an assistant can bring help.
2.Keep work area clean. Cluttered areas invite injuries.
3.Observe work area conditions. Don’t expose to rain. Keep work area well lighted.
4.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.
5.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.
6.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain long hair.
7.Use eye and ear protection. Always wear ANSI approved impact safety goggles.
Wear an ANSI approved face shield when producing metal filings.
8.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across electrical cables or frames.
REV 01i, 01k, 07g, 07h
SKU 44829 | For technical questions, please call | Page 2 |