Craftsman 137.21194 KEY Bevel Miter Type of CUT Setting, Inside corner-Left side

Page 35

Bevel/Miter Settings

KEY	BEVEL	MITER		TYPE OF CUT
	SETTING	SETTING

				Inside corner-Left side
IL	33.9°	31.6° Right	1.	Position top of molding against fence.
			2.	Miter table set at RIGHT 31.6°.
			3.	LEFT side is ﬁnished piece.
				Inside corner-Right side
IR	33.9°	31.6° Left	1.	Position bottom of molding against fence.
			2.	Miter table set at LEFT 31.6°.
			3.	LEFT side is ﬁnished piece.
				Outside corner-Left side
OL	33.9°	31.6° Left	1.	Position bottom of molding against fence.
			2.	Miter table set at LEFT 31.6°.
			3.	RIGHT side is ﬁnished piece.
				Outside corner-Right side
OR	33.9°	31.6° Right	1.	Position top of molding against fence.
			2.	Miter table set at RIGHT 31.6°.
			3.	RIGHT side is ﬁnished piece.

Image 35

Contents Sears, Roebuck and Co., Hoffman Estates, lL 60179 USA Operator’s ManualWarranty Table of ContentsRotating Table Product SpecificationsMotor Blade SizeSupport and Clamp Work SymbolsProhibition Always Wear EYE Power Tool SafetyGeneral Safety Instructions Before Using this Power Tool DANGER Specific Safety Instructions for this Compound Miter SAW Compound Miter SAW SafetyPage Double Insulated Power Supply and Motor SpecificationsMotor Safety Protection Important Minimum Gauge for Extension Cords AWG Guidelines for Extension CordsAccessories Accessories and AttachmentsRecommended Accessories Combination Square Must be True Tools Needed for AssemblySupplied Not supplied Carton Contents Know Your Sliding Compound Miter SAW Glossary of Terms Revolutions PER Minute RPM Woodworking TermsInstalling the Dust BAG FIG. C Assembly and AdjustmentsInstalling the Support Bracket FIG. a Installing the Miter Handle FIG. BUnlocking the Slide Carriage FIG. F SAW Blade Wrench FIG. EReleasing Cutting Head FIG. G Mounting the Miter SAW FIG. I, J Removing and Installing the Table Insert FIG. HBlade Removing or InstallingUn-plug the miter saw before changing/installing the blade Installing Blade FIG. K, L, MAvoid Direct EYE Contact Laser Guide FIG. NLaser Beam Fig. O Bevel Pointer Adjustment Fig. P Bevel Stop Adjustments FIG. O, P, QAdjusting Fence Squareness FIG. S Miter Angle Adjustment FIG. RMiter Scale Indicator Adjustment FIG. R Fig. S Adjusting Cutting Depth FIG. TOperation Assembly and AdjustmentsRequirements and Safety Before Each USE Inspect Your SAW Troubleshooting Guide for adjustment if necessaryInspect Your Workpiece Dress for SafetyPlan Your Work USE Extra Caution with Large or ODD Shaped Workpieces When SAW is RunningDo not OVER-REACH Never cut freehandBasic SAW Operations Body and Hand Position FIG. UFinishing a cut Before freeing jammed materialBefore Leaving the SAW Sliding Carriage System FIG. WMiter CUT FIG Compound CUT FIG. Z Bevel CUT FIG. YRough Cutting a Dado FIG. CC To Slide Cut Wide Boards Fig. AACutting Bowed Material FIG. BB Fig. CC Cutting Crown Molding FIG. GG, HH Bevel/Miter SettingsOnly When the Angle Between the Walls Equals Outside corner-Left side KEY Bevel Miter Type of CUT SettingInside corner-Left side Inside corner-Right sideCrown Molding Chart Lower Blade Guard MaintenanceMaintenance Replacing Carbon Brushes FIGLubrication FIG. JJ, KK Debris from entering eyes when Removing sawdust from unitSawdust Wear proper eye protection to keepTroubleshooting Guide EYE Protection Parts List for SAW Schematic Parts List4 in. Compound Miter SAW Model no SchematicDescription Size Qty Parts List for MotorSU-HOGAR R Sears Parts & Repair Service CenterLE-FOYER MC

Bevel/Miter Settings

KEY

BEVEL

MITER

TYPE OF CUT

SETTING

Inside corner-Left side

Inside corner-Right side

Outside corner-Left side

Outside corner-Right side